Operation Common to Each Mode
5.Press the [
] button or the [
] button to move the cursor.
6.Press the [DISP] button to select a character. Each time you press the [DISP] button, the character changes in the following order:
Capital letters ➜ Small letters ➜ Numbers/ Symbols ➜ Capital letters...
7.Turn the [VOLUME] knob either clockwise or counterclockwise to select the desired
character. Pressing the [
] button moves the cursor to the next character; pressing the
[
] button moves the cursor to the previous character.
8.Repeat steps 5 to 7 to enter up to 10 charac- ters for the title.
9.Press and hold the [
] button for 2 sec- onds or longer to store the title into memory and cancel title input mode.
Clearing titles
1.Play a CD or a CD in a CD changer, or tune a radio station or TV station that you want to clear the title for.
2.Press the [DISP] button and display the sub- title.
3.Press the [T] button. “TITL” appears in the dis- play and the display switches to the title input display.
4.Press the [BND] button.
5.Press and hold the [
] button for 2 sec- onds or longer to clear the title and cancel the title input mode.
Clock function
●Time matching
Regarding the “CLOCK INDICATION”...
The unit indicates the clock when the car engine is running (when ACC is ON).
The clock is of
1.Press the [T] button continuously (for about 1 second). “ANA_SENS” is indicated.
2.Press the [
] button or the [
] button and select “CLOCK_ _E”
3.Press the [
] button to indicate the clock. The clock indicates “AM 12:00” and turns to the “time setting” mode.
4.Press the [
] button or the [
] button and select “HOUR” or “MINUTE” may adjust items which are flashing.
5.Press the [
] button or the [
] button and match the time.
6.Press the [
] button.
7.Press the [T] button.
The unit returns to the original indication.
Triggered audio mute for cellular telephones
This unit requires special wiring to mute the au- dio signal automatically when a cellular telephone rings in the car.
∗This function is not compatible with all cellular tele- phones. Contact your local authorized Clarion dealer for information on proper installation and compatibility.
Message display
When the unit is powered on or off, a message is displayed. The user can turn this message dis- play on or off.
∗The factory default setting is “ON”.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [
] button or the [
] button to select “MESSAGE”.
3.Turn the [VOLUME] knob clockwise to set the message display to “ON”, or turn the [VOL- UME] knob counterclockwise to set the mes- sage display to “OFF”.
4.Press the [T] button to return to the previous mode.
Adjusting the way of title scrolling
There are 3 ways for scrolling a title in the dis- play. You can select the way you prefer.
∗The factory default setting is “AUTO”.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [
] button or the [
] button to select “SCROLL”.
3.Turn the [VOLUME] knob to change the display. Each time the [VOLUME] knob is turned either clockwise or counterclockwise, the display changes between the 2 display methods available.
4.Press the [T] button to return to the previous mode.
ADZ625 21