22 of 66 | Operating Instructions - 3654 Portable H2/N2 Analyzer |
|
|
2.3.3 Viewing Stored Measurements
1) Put the instrument into standby (by pressing the POWER key)
2) Hold down the Up Arrow button while switching the instrument back ON. The LCD displays a sample location number.
3) Scroll through the numbered sample locations of all the stored values using the Up Arrow and Down Arrow buttons.
4) To view the actual gas concentration measurement value at a particular sample number, press the STO button. The LCD now displays the stored value for that sample number.
5) Press STO a second time to return to the next numbered location display, to continue scrolling or view another stored value.
To return to the measurement mode, put the instrument into standby and then turn back ON again without holding down any additional buttons.
2.4 Storing and Accessing Measurements From a Computer
If you have made measurements and stored them in the analyzer, you should be ready to bring them into the WIN3654 program for viewing, copying, saving and printing. See also “Options Setup” on page 27 for additional information on the WIN3654 program.
2.4.1 Downloading Stored Values
To download the stored results from the analyzer to the PC, choose the DownLoad data command from the Logger menu.
The DownLoad window presents a display of the stored measurements from the instrument. The window displays five columns of data:
•Sample (sequence number of the sample)
•Conc (concentration of the measured gas)
•Date (date of the measurement)
•Time (time of the measurement)
•Sample Description
The descriptions can be modified for your applications using the procedures described below.
ORBISPHERE | Operator Manual |