3654 Portable H2/N2 Analyzer - Specifications | 55 of 66 |
|
|
7 | Specifications |
| |
| 7.1 Instrument Specifications |
| |
|
| Table |
|
|
|
|
|
|
| Power Requirements | Batteries: two |
|
| x 50 mm, 2.4 to 3 volts total | |
|
|
| |
|
| Battery Autonomy | 15 hours operational use, 3 weeks purge backup (power |
|
| off, purge gas supplied) | |
|
|
| |
|
| Dimensions (HxWxD) | 19.8 x 11.5 x 22 cm |
|
| Weight (including purge gas | 4.6 kg |
|
| cylinder and sensor) | |
|
|
| |
|
| Purge Gas | Nitrogen (H2 sensors) |
|
| Carbon Dioxide (N2 and H2 sensors) | |
|
|
| |
|
| Purge Gas Cylinder Pressure | 200 bar maximum for N2 purge gas |
|
| Limit (see also Note below) | 60 bar maximum for CO2 purge gas |
|
|
| 40 hours when cylinder filled to 200 bar of N2 |
|
| Purge Gas Autonomy | 20 hours when cylinder filled to 100 bar of N2 |
|
|
| 120 hours when cylinder filled with 75% of CO2 liquid |
|
| Capacity of Purge Gas Cylinder | 65 ml |
|
|
| Baud rate: 4800 |
|
|
| Data bits: 8 |
|
| Digital Output (RS232C) | Stop Bits: 1 |
|
|
| Start Bits: 0 |
|
|
| Parity: None |
|
| Measurement Cycle Time | 20 seconds |
|
| Temperature of Use | 0 to 40°C (32 to 104°F) |
|
| Temperature of Sample | |
|
| Sample Pressure Limit (32013A | < 10 bar, at <= 25° C |
|
| and 32015 flow chambers) |
|
|
| Enclosure Protection | IP 67 |
|
| CE Certification | EN |
|
| Directive 89/336/CE | |
|
|
| |
|
|
|
|
Note:
In accordance with the Pressure Equipment Directive 97/23/EC (Article 3.3), the components that make up the purge gas cylinder and pressure reducer, are not subject to the technical requirements of this directive.
Operator Manual | ORBISPHERE |