Panasonic AJ-D250P operating instructions Frame by frame advance, Audio switching

Operation

Frame by frame advance

When the FF or REW button is pressed during still picture playback, the tape will be advanced forward or backward one frame at a time.

ONo sound will be heard during frame by frame advance.

Audio switching

The AUDIO OUT SELECT button is used to switch to the desired sound.

By pressing this button, the audio output is switched to the modes in the sequence shown below.

Mode	AUDIO OUT connectors			Display tube	LED
	CH1 output	CH2 output
A	CH1		CH2	CH1	CH3
				CH2	CH4
B	CH1			CH1	CH3
					CH4
C	CH2				CH3
				CH2	CH4
D	CH3		CH4	No display	CH3
					CH4
E	CH3			No display	CH3
					CH4
F	CH4			No display	CH3
					CH4
G	CH1+CH3		CH2+CH4	CH1	CH3
				CH2	CH4

The settings in the boxes ( ) are valid only during DV format 4-channel mode playback.

Sequence in which the modes are selected [. A > B > C > D > E > F > G .] a"""""""""""""""""""""" }

•• • • • • • OFF

•• • • • • • ON

REC CHECK

By pressing the REC button during playback or in the STOP or STANDBY OFF mode, it is possible to check the audio input signals, time code generator value and the video input signals which have been selected using the INPUT SELECT switch.

OREC CHECK during playback

The REC CHECK mode is established while the REC button is held down. Normal playback is restored when the button is released.

OREC CHECK in the STOP or STANDBY OFF mode

The REC CHECK mode is established when the REC button is pressed. To release the mode, press the STOP button.

15