Panasonic AJ-D250P operating instructions OBitmap table B

RS-232C

OBitmap table (B)

ADDRESS	BIT7	BIT6	BIT5	BIT4		BIT3	BIT2	BIT1	BIT0
AD 0	FULL EE	SELECT EE	0	0		0	0	TAPE END	TAPE TOP
								( )	( )
AD 1	SHORT PLAY	0	STANDBY	0		0	0	0	SERVO LOCK
AD 2	REC INHIBIT	CASSETTE	0				VTR STATUS
	TAB	IN/OUT
AD 3	TAPE				SHUTTLE SPEED
	DIRECTION
AD 4	0	INSERT	INSERT	INSERT		0	0	0	0
		VIDEO	AUDIO CH1	AUDIO CH2

<Note >

“1” is used as the TAPE END bit and TAPE TOP bit when the tape start or end is detected, and the bits are cleared to “0” when queried by the QOS command.

VTR STATUS DATA

BIT4 BIT0	VTR STATUS
1, 1, 1, 1, 1	INSERT PAUSE
1, 1, 1, 1, 0	INSERT
0, 1, 1, 1, 0	SEARCH
0, 1, 1, 0, 1	AUDIO INSERT PAUSE
0, 1, 1, 0, 0	AUDIO INSERT
0, 1, 0, 1, 1	RECORDING PAUSE
0, 1, 0, 1, 0	RECORDING

BIT4 BIT0	VTR STATUS
0, 1, 0, 0, 1	PLAY PAUSE
0, 1, 0, 0, 0	PLAY
0, 0, 0, 1, 1	FAST FORWARD
0, 0, 0, 1, 0	REWIND
0, 0, 0, 0, 1	EJECT
0, 0, 0, 0, 0	STOP

SHUTTLE SPEED DATA

BIT4 BIT0	SHUTTLE SPEED
60	(±) 9.5 a or more
59	(±) 3.0 a or more but less than (±) 9.5 a
4A	(±) 1.85 a or more but less than
	(±) 3.0 a
40	(±) 1.0 a or more but less than
	(±) 1.85a
36	(±) 0.43a or more but less than
	(±) 1.0 a

BIT4 BIT0	SHUTTLE SPEED
2A	(±) 0.2 a or more but less than
	(±) 0.43 a

20(±) 0.1 a or more but less than (±) 0.2 a

13	(±) 0.03 a or more but less than
	(±) 0.1 a
00	STILL

62