JVC HR-J313EU specifications Basic Recording

Page 17

RECORDING

EN17

Basic

Recording

Turn on the TV and select the VIDEO channel (or AV mode).

TV signals being received by the recorder’s built-in tuner can be recorded onto a video tape. You can “capture” a TV programme using your video recorder.

1		LOAD A CASSETTE
	Insert a cassette with the record safety tab intact.

		● The counter is reset to 0:00:00 and the recorder
		power comes on automatically.

		CHOOSE A PROGRAMME
	Press TV PROG +/– or the NUMBER keys to select the
2 channel you wish to record.
		START RECORDING
	Press and hold RECORD and press PLAY on the remote

	1	2	3
NUMBER	4	5	6
NUMBER

7 8 9

0

1

?

2

4

TV PROG

3 control, or press RECORD on the recorder.

B.E.S.T. takes place at the beginning of the first

recording after inserting the cassette (☞ pg. 20).

If "DIRECT REC" is set to "ON", the programme

that appears on the TV screen will be recorded

(☞ pg. 11).

PAUSE/RESUME

PLAY

PAUSE

RECORD

STOP

RECORDING

4 Press PAUSE. Press PLAY to resume recording.

STOP RECORDING

Press STOP on the remote control or STOP/EJECT on

the recorder. Then press STOP/EJECT to remove the

5 cassette.

Accidental erasure prevention

The PLAY, RECORD and PAUSE buttons on the recorder have the same functions as those on the remote control.

Recording Resume Function

If there is a power outage during recording (or Instant Timer Recording or timer recording), the recording will resume automatically when power is restored to the recorder unless the recorder's memory backup has expired.

●To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.

Record safety tab

Image 17

Contents HR-J313EU Do not place the recorder Safety PrecautionsFor Italy Basic Connections Check ContentsSituate Recorder Connect Recorder to MainsEN Initial Settings Auto Set UpIf you are referring to the front display panel If you are referring to the on-screen displayVia an RF cable only RF connection Language CodeYour TV to the Video Channel. Refer to ThisENU Preset DownloadLanguage for the on-screen display If both auto channel set and auto clock set have failedJust Clock Just Clock onLanguage ENABLE/DISABLE ON-SCREEN Display Access Main Menu ScreenOn-Screen Displays Return to Normal ScreenPower Save Mode Link Functions TV Auto Power OnLI NK NexTView LinkMode Colour System SetAbout Ntsc Playback Counter and tape remaining time readings will be incorrectLoad a Cassette Basic PlaybackPoint Start PlaybackSearch Playback FeaturesPlayback Override Automatic Tracking Adjust TrackingManually Return to AutomaticSelect Picture Control SET Mode Access Mode SET ScreenEN Playback Repeat PlaybackBasic Recording Reset Counter Recording FeaturesSelect Channel to Watch Display Remaining TimeInstant Timer Recording ITR Engage ITR ModeSET Recording Duration Press Record on the recorderPreparation S.T. Picture SystemS.T., then press OK or #to set to on or OFFOr press Record on the recorder RecordingPlayback EN Timer Recording Timer ProgrammingSatellite Tuner Users Timer WarningStart Time Express Timer ProgrammingEnter Programme Stop TimeIf no VPS/PDC signal is detected from the station, VPS SET VPS/PDC ModeVPS/PDC Recording Press TV Prog +Press ä Timer Check, Cancel And Replace ProgrammesPress Again to check More information. Each Time you press Next programmesAuto TIMER, then press Auto TimerOK or #to select either On or OFFREC Link indicator Select AV2 Select ModeAutomatic Satellite Programme Recording Before performing the following stepsEdit From a Camcorder SET Edit ModeMake Connections SET RECORDER’S InputEdit To Or From Another Video Recorder Input ModeSET Recording DECK’S Start Source PlayerAV2 IN/DECODER connector AV2 Select SettingRecorder Press %Þ to move the highlight bar pointer to AV2 SelectEN System Connections Connection To Satellite TunerSatellite Tuner Unit Back of TVSet AV2 Select to AV2. pg DecoderSelect Input Mode Connecting Using a DecoderConnect Decoder SET TunerSubsidiary Settings EN Showview SetupNumber Enter Receiving Channel Position NumberEN SU Bsidiary Settings Access Auto CH SETTuner Set Auto Channel SetView Confirmation Screen Perform Auto Channel SETStoring Channels Manually SU Bsidiary SettingsDelete a Channel When Receiving a Scrambled BroadcastChange Station Channel Position Press %Þ @ #until the item you want to move beginsPerform Tuning Access Manual Channel SET ScreenAccess Manual Switch StationsTV Station And ID List SET Date and Time Clock SetTurn the Recorder on Recorder is preset to receive clock setting Default setting is OFF. Set as desired by pressingSET Just Clock Channel position to the number representingExit Video Channel SET Mode Access Video Channel SET ModeVideo Channel Set SET RF Output SystemTroubleshooting EN Roubleshooting Timer RecordingQuest Ions and Answers EN Ä remain lit on the display panel. Is there Problem?Front View IndexRear View VCR, TV Prog +/-,TV +/-, TV Muting EN IndexIN/OUT x 1, IN/DECODER x Speci FicationsRotary two-head herical scan Ex. Francais is selected for Belgium Auto Set Up referring to the display panel