JVC HR-J313EU Connection To Satellite Tuner, EN System Connections, Satellite Tuner Unit

Page 32

32ENSYSTEMCONNECTIONS

Connection To

ASatellite Tuner

If you don't have a decoder . . .

Connect the satellite tuner to the video recorder's AV2 IN/ DECODER connector, then connect the recorder's AV1 IN/OUT connector to the TV's 21-pin SCART connector.

NOTES:

●Set "AV2 SELECT" to "AV2". (☞ pg. 31)

●You can use Automatic Satellite Program Recording function (☞ pg. 28) with this connection.

●To view a programme via the satellite tuner, select L-2 mode by pressing NUMBER keys and/or TV PROG so that

"L-2" appears on the display panel.

●For details, refer to the instruction manual for the satellite tuner.

Outdoor Unit

Satellite Cable

Satellite Tuner Unit

DECODER

VCR

TV

Mains outlet

AerialAerial connector

Back of TV

TV Aerial cable

ANT. IN

RF OUT

21-pin AV input connector (SCART)

		ENTREE
AV2 ENTREE/DECODEUR	AV1 ENTREE/SORTIE	ANTENNE
IN/DECODER	IN/OUT	SORTIE
		RF OUT

Back of Recorder

IMPORTANT

When you set "AV2 SELECT" to "SAT" (☞ pg. 31), it is possible to view a satellite broadcast with the TV set to its AV mode even if the recorder is in Timer mode, in Stop mode, recording or turned off. When the recorder is in Stop mode or recording, press TV/VCR on the remote control to turn off the VCR indicator on the display panel.

Image 32

Contents HR-J313EU Do not place the recorder Safety PrecautionsFor Italy Check Contents Basic ConnectionsSituate Recorder Connect Recorder to MainsAuto Set Up EN Initial SettingsIf you are referring to the front display panel If you are referring to the on-screen displayLanguage Code Via an RF cable only RF connectionYour TV to the Video Channel. Refer to ThisPreset Download ENUIf both auto channel set and auto clock set have failed Language for the on-screen displayJust Clock Just Clock onLanguage Access Main Menu Screen ENABLE/DISABLE ON-SCREEN DisplayOn-Screen Displays Return to Normal ScreenPower Save Mode TV Auto Power On Link FunctionsLI NK NexTView LinkColour System Set ModeAbout Ntsc Playback Counter and tape remaining time readings will be incorrectBasic Playback Load a CassettePoint Start PlaybackSearch Playback FeaturesPlayback Adjust Tracking Override Automatic TrackingManually Return to AutomaticAccess Mode SET Screen Select Picture Control SET ModeEN Playback Repeat PlaybackBasic Recording Recording Features Reset CounterSelect Channel to Watch Display Remaining TimeEngage ITR Mode Instant Timer Recording ITRSET Recording Duration Press Record on the recorderS.T. Picture System PreparationS.T., then press OK or #to set to on or OFFOr press Record on the recorder RecordingPlayback Timer Programming EN Timer RecordingTimer Warning Satellite Tuner UsersExpress Timer Programming Start TimeEnter Programme Stop TimeSET VPS/PDC Mode If no VPS/PDC signal is detected from the station, VPSVPS/PDC Recording Press TV Prog +Check, Cancel And Replace Programmes Press ä TimerPress Again to check More information. Each Time you press Next programmesAuto Timer Auto TIMER, then pressOK or #to select either On or OFFSelect AV2 Select Mode REC Link indicatorAutomatic Satellite Programme Recording Before performing the following stepsSET Edit Mode Edit From a CamcorderMake Connections SET RECORDER’S InputInput Mode Edit To Or From Another Video RecorderSET Recording DECK’S Start Source PlayerAV2 Select Setting AV2 IN/DECODER connectorRecorder Press %Þ to move the highlight bar pointer to AV2 SelectConnection To Satellite Tuner EN System ConnectionsSatellite Tuner Unit Back of TVDecoder Set AV2 Select to AV2. pgConnecting Using a Decoder Select Input ModeConnect Decoder SET TunerShowview Setup Subsidiary Settings ENNumber Enter Receiving Channel Position NumberAccess Auto CH SET EN SU Bsidiary SettingsTuner Set Auto Channel SetPerform Auto Channel SET View Confirmation ScreenSU Bsidiary Settings Storing Channels ManuallyWhen Receiving a Scrambled Broadcast Delete a ChannelChange Station Channel Position Press %Þ @ #until the item you want to move beginsAccess Manual Channel SET Screen Perform TuningAccess Manual Switch StationsTV Station And ID List SET Date and Time Clock SetTurn the Recorder on Default setting is OFF. Set as desired by pressing Recorder is preset to receive clock settingSET Just Clock Channel position to the number representingAccess Video Channel SET Mode Exit Video Channel SET ModeVideo Channel Set SET RF Output SystemTroubleshooting EN Timer Recording RoubleshootingÄ remain lit on the display panel. Is there Problem? Quest Ions and Answers ENIndex Front ViewRear View EN Index VCR, TV Prog +/-,TV +/-, TV MutingIN/OUT x 1, IN/DECODER x Speci FicationsRotary two-head herical scan Auto Set Up referring to the display panel Ex. Francais is selected for Belgium