JVC HR-J313EU specifications SET VPS/PDC Mode, VPS/PDC Recording, Press TV Prog +

Page 25

6

ENTER CHANNEL POSITION

Press TV PROG +/–.

– P1 –

 

START

STOP

21:00

= 22:00

 

 

VPS/PDC OFF

 

DATE

TV PROG

 

25.12

1

 

[+/–] =

ARD

 

 

 

[PROG] : EXIT

 

7

SET VPS/PDC MODE

Press VPS/PDC to select "ON" or "OFF".

If "VPS/PDC ON" is displayed on the screen or "VPS/

PDC" is lit on the display panel, VPS/PDC is set to ON.

If "VPS/PDC OFF" is displayed on the screen or "VPS/PDC"

 

is not lit on the display panel, VPS/PDC is set to OFF.

 

☞ "VPS/PDC Recording" in the right column.

RETURN TO NORMAL

SCREEN

8 After confirming all information is correct, press PROG or OK. "PROGRAM COMPLETED" appears on the screen for about 5 seconds, then normal screen appears.

● Repeat steps 1 – 8 for each additional programme.

ENGAGE RECORDER’S

TIMER MODE

9 Press ä (TIMER). The recorder turns off automatically and ä appears on the display panel.

● To disengage the timer, press ä (TIMER) again.

To Timer-Record Weekly Or Daily Serials . . .

. . . anytime during steps 2 through 8, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials (Monday – Friday). Either "WEEKLY" or "DAILY" appears on the screen. Pressing the button again makes the corresponding indication disappear.

EN25

Satellite Tuner Users

To timer-record a satellite broadcast using Express Timer Programming:

1 Set "AV2 SELECT" to "AV2" (☞ pg. 31).

2 Perform steps 1 – 9. Enter "L-2" for the channel position in step 6.

3 Set the satellite tuner to the appropriate channel before the selected programme begins.

4 Leave the satellite tuner's power on.

VPS/PDC Recording

Now available from some TV stations, PDC (Programme Delivery Control) and VPS (Video Programme System) are service designed to assure safe, accurate timer recording. With this system, special code signals are transmitted together with the audio/video signals. These code signals control your video recorder and have precedence over the advertised times you may have preset into the timer. This means that your recorder will start and stop recording when the preset TV programmes actually start and end — even if the broadcast time of a preset TV programme is changed.

NOTES:

● When you use Express Timer Programming, set the start time (VPS or PDC time) exactly as advertised in the TV listing. A different time than advertised will result in no recording.

● VPS/PDC recording is also possible when a satellite tuner or a cable system is connected to AV2 IN/DECODER on your recorder.

● VPS/PDC recording is also possible via the AV1 IN/OUT connector.

How to check if the station being received transmits a VPS/PDC signal

1 Press – –:– – until the channel position appears on the display panel.

2 Hold down START+ for about 5 seconds.

● "VPS/PDC" appears blinking on the display panel. If a VPS/PDC signal is detected from the station, "VPS/ PDC" will stop blinking.

If no VPS/PDC signal is detected from the station, "VPS/

PDC" will blink at a slower rate.

3 Press – –:– – or START+ again to return to normal display.

NOTE:

You can programme this recorder to timer-record as many as 8 programmes. If you try to programme the recorder to record a ninth, "PROGRAM FULL" appears on screen and "FULL" appears on the front display panel. To record the extra programme, you must first cancel any unnecessary programmes (☞ pg. 26).

Timer Warning

If you have programmed your recorder to timer-record a programme or a series of programmes, a warning appears on screen to tell you that the recording is to start in 5 minutes.

–WARNING– TIMER RECORDING

TO START SOON

[]

NOTES:

●The warning only appears if

you’re not in the Timer mode at that time.

●If this recorder is being used as the player for tape dubbing, the warning screen is recorded on the tape in the other video recorder.

The warning blinks for the entire 5 minutes leading up to the start of timer recording. To clear the display, press .

Page 24 Page 26
Image 25
Page 24 Page 26
Contents HR-J313EU For Italy Safety PrecautionsDo not place the recorder Basic Connections Check ContentsSituate Recorder Connect Recorder to MainsEN Initial Settings Auto Set UpIf you are referring to the front display panel If you are referring to the on-screen displayVia an RF cable only RF connection Language CodeYour TV to the Video Channel. Refer to ThisENU Preset DownloadLanguage for the on-screen display If both auto channel set and auto clock set have failedJust Clock Just Clock onLanguage ENABLE/DISABLE ON-SCREEN Display Access Main Menu ScreenOn-Screen Displays Return to Normal ScreenPower Save Mode Link Functions TV Auto Power OnLI NK NexTView LinkMode Colour System SetAbout Ntsc Playback Counter and tape remaining time readings will be incorrectLoad a Cassette Basic PlaybackPoint Start PlaybackPlayback Playback FeaturesSearch Override Automatic Tracking Adjust TrackingManually Return to AutomaticSelect Picture Control SET Mode Access Mode SET ScreenEN Playback Repeat PlaybackBasic Recording Reset Counter Recording FeaturesSelect Channel to Watch Display Remaining TimeInstant Timer Recording ITR Engage ITR ModeSET Recording Duration Press Record on the recorderPreparation S.T. Picture SystemS.T., then press OK or #to set to on or OFFPlayback RecordingOr press Record on the recorder EN Timer Recording Timer ProgrammingSatellite Tuner Users Timer WarningStart Time Express Timer ProgrammingEnter Programme Stop TimeIf no VPS/PDC signal is detected from the station, VPS SET VPS/PDC ModeVPS/PDC Recording Press TV Prog +Press ä Timer Check, Cancel And Replace ProgrammesPress Again to check More information. Each Time you press Next programmesAuto TIMER, then press Auto TimerOK or #to select either On or OFFREC Link indicator Select AV2 Select ModeAutomatic Satellite Programme Recording Before performing the following stepsEdit From a Camcorder SET Edit ModeMake Connections SET RECORDER’S InputEdit To Or From Another Video Recorder Input ModeSET Recording DECK’S Start Source PlayerAV2 IN/DECODER connector AV2 Select SettingRecorder Press %Þ to move the highlight bar pointer to AV2 SelectEN System Connections Connection To Satellite TunerSatellite Tuner Unit Back of TVSet AV2 Select to AV2. pg DecoderSelect Input Mode Connecting Using a DecoderConnect Decoder SET TunerSubsidiary Settings EN Showview SetupNumber Enter Receiving Channel Position NumberEN SU Bsidiary Settings Access Auto CH SETTuner Set Auto Channel SetView Confirmation Screen Perform Auto Channel SETStoring Channels Manually SU Bsidiary SettingsDelete a Channel When Receiving a Scrambled BroadcastChange Station Channel Position Press %Þ @ #until the item you want to move beginsPerform Tuning Access Manual Channel SET ScreenAccess Manual Switch StationsTV Station And ID List Turn the Recorder on Clock SetSET Date and Time Recorder is preset to receive clock setting Default setting is OFF. Set as desired by pressingSET Just Clock Channel position to the number representingExit Video Channel SET Mode Access Video Channel SET ModeVideo Channel Set SET RF Output SystemTroubleshooting EN Roubleshooting Timer RecordingQuest Ions and Answers EN Ä remain lit on the display panel. Is there Problem?Front View IndexRear View VCR, TV Prog +/-,TV +/-, TV Muting EN IndexRotary two-head herical scan Speci FicationsIN/OUT x 1, IN/DECODER x Ex. Francais is selected for Belgium Auto Set Up referring to the display panel
Top Page Image Contents