JVC HR-J313EU specifications Safety Precautions, For Italy, Do not place the recorder

Page 2

2EN

SAFETYFIRST

Safety Precautions

The rating plate and the safety caution are on the rear of the unit.

WARNING: DANGEROUS VOLTAGE INSIDE

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTION

■When you are not using the recorder for a long period of time, it is recommended that you disconnect the power cord from the mains outlet.

■Dangerous voltage inside. Refer internal servicing to qualified service personnel. To prevent electric shock or fire hazard, remove the power cord from the mains outlet prior to connecting or disconnecting any signal lead or aerial.

WARNING

There are two different types of SECAM colour systems: SECAM-L, used in FRANCE (also called SECAM-West), and SECAM-B, used in Eastern European countries (also called SECAM-East).

1.This recorder can also receive SECAM-B colour television signals for recording and playback.

2.Recordings made of SECAM-B television signals produce monochrome pictures if played back on a video recorder of SECAM-L standard, or do not produce normal colour pictures if played back on a PAL video recorder with SECAM-B system incorporated (even if the TV set is SECAM-compatible).

3.SECAM-L prerecorded cassettes or recordings made with a SECAM-L video recorder produce monochrome pictures when played back with this recorder.

4.This recorder cannot be used for the SECAM-L standard. Use a SECAM-L recorder to record SECAM-L signals.

For Italy:

"It is declared that this product, brand JVC, conforms to the Ministry Decree n. 548 of 28 Aug.'95 published in the Official Gazette of the Italian Republic n. 301 of 28 Dec.'95"

The STANDBY/ON button does not completely shut off mains power from the unit, but switches operating

current on and off. " " shows electrical power standby and " " shows ON.

IMPORTANT

■Please read the various precautions on this page before installing or operating the recorder.

■It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video record- ing, broadcast or cable programme and in any literary, dramatic, musical, or artistic work embodied therein.

Video tapes recorded with another recorder in the LP (Long Play) mode cannot be played back on this video recorder.

Failure to heed the following precautions may result in damage to the recorder, remote control or video cassette.

1. DO NOT place the recorder . . .

... in an environment prone to extreme temperatures or humidity.

... in direct sunlight.

... in a dusty environment.

... in an environment where strong magnetic fields are generated.

... on a surface that is unstable or subject to vibration.

2.DO NOT block the recorder’s ventilation openings.

3.DO NOT place heavy objects on the recorder or remote control.

4.DO NOT place anything which might spill on top of the recorder or remote control.

5.AVOID violent shocks to the recorder during transport.

MOISTURE CONDENSATION

Moisture in the air will condense on the recorder when you move it from a cold place to a warm place, or under extremely humid conditions—just as water droplets form in the surface of a glass filled with cold liquid. Moisture condensation on the head drum will cause damage to the tape. In conditions where condensation may occur, keep the recorder turned on for a few hours to let the moisture dry.

PAL

■Cassettes marked "VHS" (or "S-VHS") can be used with this video cassette recorder, however, only VHS signals can be played back and recorded.

■HQ VHS is compatible with existing VHS equipment.

■SHOWVIEW is a registered trademark of Gemstar Development Corporation. The SHOWVIEW system is manufactured under licence from Gemstar Development Corporation.

ABOUT HEAD CLEANING

Accumulation of dirt and other particles on the video heads may cause the playback picture to become blurred or inter- rupted. Be sure to contact your nearest JVC dealer if such troubles occur.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents HR-J313EU Do not place the recorder Safety PrecautionsFor Italy Situate Recorder Check ContentsBasic Connections Connect Recorder to MainsIf you are referring to the front display panel Auto Set UpEN Initial Settings If you are referring to the on-screen displayYour TV to the Video Channel. Refer to Language CodeVia an RF cable only RF connection ThisPreset Download ENUJust Clock If both auto channel set and auto clock set have failedLanguage for the on-screen display Just Clock onLanguage On-Screen Displays Access Main Menu ScreenENABLE/DISABLE ON-SCREEN Display Return to Normal ScreenPower Save Mode LI NK TV Auto Power OnLink Functions NexTView LinkAbout Ntsc Playback Colour System SetMode Counter and tape remaining time readings will be incorrectPoint Basic PlaybackLoad a Cassette Start PlaybackSearch Playback FeaturesPlayback Manually Adjust TrackingOverride Automatic Tracking Return to AutomaticEN Playback Access Mode SET ScreenSelect Picture Control SET Mode Repeat PlaybackBasic Recording Select Channel to Watch Recording FeaturesReset Counter Display Remaining TimeSET Recording Duration Engage ITR ModeInstant Timer Recording ITR Press Record on the recorderS.T., then press OK or S.T. Picture SystemPreparation #to set to on or OFFOr press Record on the recorder RecordingPlayback Timer Programming EN Timer RecordingTimer Warning Satellite Tuner UsersEnter Programme Stop Express Timer ProgrammingStart Time TimeVPS/PDC Recording SET VPS/PDC ModeIf no VPS/PDC signal is detected from the station, VPS Press TV Prog +Press Again to check More information. Each Time you press Check, Cancel And Replace ProgrammesPress ä Timer Next programmesOK or #to select either Auto TimerAuto TIMER, then press On or OFFAutomatic Satellite Programme Recording Select AV2 Select ModeREC Link indicator Before performing the following stepsMake Connections SET Edit ModeEdit From a Camcorder SET RECORDER’S InputSET Recording DECK’S Input ModeEdit To Or From Another Video Recorder Start Source PlayerRecorder AV2 Select SettingAV2 IN/DECODER connector Press %Þ to move the highlight bar pointer to AV2 SelectSatellite Tuner Unit Connection To Satellite TunerEN System Connections Back of TVDecoder Set AV2 Select to AV2. pgConnect Decoder Connecting Using a DecoderSelect Input Mode SET TunerNumber Showview SetupSubsidiary Settings EN Enter Receiving Channel Position NumberTuner Set Access Auto CH SETEN SU Bsidiary Settings Auto Channel SetPerform Auto Channel SET View Confirmation ScreenSU Bsidiary Settings Storing Channels ManuallyChange Station Channel Position When Receiving a Scrambled BroadcastDelete a Channel Press %Þ @ #until the item you want to move beginsAccess Manual Access Manual Channel SET ScreenPerform Tuning Switch StationsTV Station And ID List SET Date and Time Clock SetTurn the Recorder on SET Just Clock Default setting is OFF. Set as desired by pressingRecorder is preset to receive clock setting Channel position to the number representingVideo Channel Set Access Video Channel SET ModeExit Video Channel SET Mode SET RF Output SystemTroubleshooting EN Timer Recording RoubleshootingÄ remain lit on the display panel. Is there Problem? Quest Ions and Answers ENIndex Front ViewRear View EN Index VCR, TV Prog +/-,TV +/-, TV MutingIN/OUT x 1, IN/DECODER x Speci FicationsRotary two-head herical scan Auto Set Up referring to the display panel Ex. Francais is selected for Belgium
Top Page Image Contents