JVC HR-J313EU Recording Features, Select Channel to Watch, Reset Counter, Display Remaining Time

18ENRECORDING(cont.)

Recording Features

Record One Programme While Watching Another

If your recorder is connected to the TV via AV connection, . . .

. . . press TV/VCR. The recorder's VCR indicator and the TV broadcast being recorded disappear.

STANDBY/ON

	V
	PROG
TIMER
REC LINK	TV PROG

DISPLAY

DISPLAY

SELECT CHANNEL TO

WATCH

1 Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view.

●The programme selected with the TV’s channel controls appears on the TV screen while the one selected with the recorder's TV PROG buttons is recorded on the tape.

●If a decoder is connected to the recorder (☞ pg. 34), you can select a scrambled channel as well with the TV channel controls.

TV/VCR

1 2 3

4 5 6

7 8 9

– –:– –

2

Elapsed Recording Time Indication

You can check the exact time of a recording.

SET COUNTER DISPLAY

Press DISPLAY or – –:– – until a counter reading

1 appears on the display panel.

0000

0

4

TV PROG

2		RESET COUNTER
	Press 0000 before starting recording or playback.
		● The counter is reset to “0:00:00” and shows the exact
		elapsed time as the tape runs.

1

?

3

Tape Remaining Time

DISPLAY REMAINING TIME

1 Press DISPLAY or – –:– – until the time remaining on the tape appears.

●The display panel shows the tape remaining time with "" displayed.

●By pressing the – –:– – button, you can change the display to show the counter reading, channel position*, clock time or tape remaining time.

*channel position is not displayed during playback.

NOTE:

Depending on the type of tape used, there may be times when the tape remaining time reading may not appear right away, or is not correct. "– –:– –" may sometimes appear, or the display may blink on occasion.