JVC HR-J313EU Edit From a Camcorder, Make Connections, SET RECORDER’S Input, SET Edit Mode

Page 29

EDITING

EN29

Edit From A Camcorder

You can use a camcorder as the source player and your video recorder as the recorder.

		MAKE CONNECTIONS
	Connect the camcorder’s AUDIO/VIDEO OUT connec-
		tors to the recorder’s AV2 IN/DECODER or AV1 IN/OUT
1 connector via the cable adapter.
		SET RECORDER’S INPUT
2		MODE
	Press NUMBER key "0" and/or TV PROG to select
		depending on the connector being used — “L-1” for the
		AV1 IN/OUT connector, or “L-2” for the AV2 IN/
		DECODER connector.

1 2 3

4 5 6

7 8 9

NUMBER "0"	0

2

4

TV PROG

● When using the AV2 IN/DECODER connector, make

sure "AV2 SELECT" is set to "AV2" (☞ pg. 31).

SET EDIT MODE

3 See "Picture Control" on page 16.

START CAMCORDER

Engage its Play mode.

1

?

4

START RECORDER

5 Engage its Record mode.

Your recorder

		ENTREE
		ANT. IN
AV2 ENTREE/DECODEUR	AV1 ENTREE/SORTIE	ANTENNE
IN/DECODER	IN/OUT	SORTIE
		RF OUT

NOTES:

●All necessary cables can be obtained from your dealer.

●When you select EDIT to dub tapes in step 3, be sure to select AUTO (or NORM when B.E.S.T. is set to OFF) after you finish dubbing the tapes.

Cable adapter (not provided)

Audio/Video cable

(not provided)

AUDIO OUT

Camcorder

VIDEO OUT

Player

Image 29

Contents HR-J313EU Do not place the recorder Safety PrecautionsFor Italy Basic Connections Check ContentsSituate Recorder Connect Recorder to MainsEN Initial Settings Auto Set UpIf you are referring to the front display panel If you are referring to the on-screen displayVia an RF cable only RF connection Language CodeYour TV to the Video Channel. Refer to ThisENU Preset DownloadLanguage for the on-screen display If both auto channel set and auto clock set have failedJust Clock Just Clock onLanguage ENABLE/DISABLE ON-SCREEN Display Access Main Menu ScreenOn-Screen Displays Return to Normal ScreenPower Save Mode Link Functions TV Auto Power OnLI NK NexTView LinkMode Colour System SetAbout Ntsc Playback Counter and tape remaining time readings will be incorrectLoad a Cassette Basic PlaybackPoint Start PlaybackSearch Playback FeaturesPlayback Override Automatic Tracking Adjust TrackingManually Return to AutomaticSelect Picture Control SET Mode Access Mode SET ScreenEN Playback Repeat PlaybackBasic Recording Reset Counter Recording FeaturesSelect Channel to Watch Display Remaining TimeInstant Timer Recording ITR Engage ITR ModeSET Recording Duration Press Record on the recorderPreparation S.T. Picture SystemS.T., then press OK or #to set to on or OFFOr press Record on the recorder RecordingPlayback EN Timer Recording Timer ProgrammingSatellite Tuner Users Timer WarningStart Time Express Timer ProgrammingEnter Programme Stop TimeIf no VPS/PDC signal is detected from the station, VPS SET VPS/PDC ModeVPS/PDC Recording Press TV Prog +Press ä Timer Check, Cancel And Replace ProgrammesPress Again to check More information. Each Time you press Next programmesAuto TIMER, then press Auto TimerOK or #to select either On or OFFREC Link indicator Select AV2 Select ModeAutomatic Satellite Programme Recording Before performing the following stepsEdit From a Camcorder SET Edit ModeMake Connections SET RECORDER’S InputEdit To Or From Another Video Recorder Input ModeSET Recording DECK’S Start Source PlayerAV2 IN/DECODER connector AV2 Select SettingRecorder Press %Þ to move the highlight bar pointer to AV2 SelectEN System Connections Connection To Satellite TunerSatellite Tuner Unit Back of TVSet AV2 Select to AV2. pg DecoderSelect Input Mode Connecting Using a DecoderConnect Decoder SET TunerSubsidiary Settings EN Showview SetupNumber Enter Receiving Channel Position NumberEN SU Bsidiary Settings Access Auto CH SETTuner Set Auto Channel SetView Confirmation Screen Perform Auto Channel SETStoring Channels Manually SU Bsidiary SettingsDelete a Channel When Receiving a Scrambled BroadcastChange Station Channel Position Press %Þ @ #until the item you want to move beginsPerform Tuning Access Manual Channel SET ScreenAccess Manual Switch StationsTV Station And ID List SET Date and Time Clock SetTurn the Recorder on Recorder is preset to receive clock setting Default setting is OFF. Set as desired by pressingSET Just Clock Channel position to the number representingExit Video Channel SET Mode Access Video Channel SET ModeVideo Channel Set SET RF Output SystemTroubleshooting EN Roubleshooting Timer RecordingQuest Ions and Answers EN Ä remain lit on the display panel. Is there Problem?Front View IndexRear View VCR, TV Prog +/-,TV +/-, TV Muting EN IndexIN/OUT x 1, IN/DECODER x Speci FicationsRotary two-head herical scan Ex. Francais is selected for Belgium Auto Set Up referring to the display panel