JVC HR-J313EU specifications SET Just Clock, Default setting is OFF. Set as desired by pressing

1 2 3

2

4 5 6

7 8 9

0 4

1 ?

OK

MENU

			EN	43
6		SET JUST CLOCK
	The default setting is “OFF”. Set as desired by pressing
		%Þ, then press OK or #.
		● For the Just clock function, ☞ "Just Clock" on page
	42.
		● If you set to “OFF”, you can disregard the next step as
		you won’t be able to receive regular clock adjustments.
		SET CLOCK DATA SOURCE
7		CHANNEL POSITION
	The recorder is preset to receive clock setting and
		adjustment data from channel position 1. Press %Þto set
		the channel position to the number representing the
		station transmitting clock setting data, then press OK or #.
8		START CLOCK OPERATION
	Press MENU.

NOTES:

●Just Clock (when set to "ON") adjusts the recorder's built-in clock every hour, except for 23:00, 0:00, 1:00 and 2:00.

●Just Clock is not effective when . . .

–the recorder’s power is on.

–the recorder is in the Timer mode.

–a difference of more than 3 minutes exists between the built-in clock’s time and the actual time.

–the recorder is in the Auto Satellite Prog Rec mode (☞ pg. 28).

–the recorder is in the Power Save mode (☞ pg. 10).

●If Just Clock is set to "ON", the recorder’s clock is automati- cally adjusted at the start/end of Summer Time.

●Just Clock may not function properly depending on the reception condition.