JVC HR-J313EU specifications Clock Set, Turn the Recorder on, SET Date and Time

42ENSUBSIDIARYSETTINGS(cont.)

Clock Set

Turn on the TV and select the VIDEO channel (or AV mode).

1 2 3

2

4 5 6

7 8 9

0 4

1 ?

OK

MENU

Just Clock

The Just Clock function provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal.

The Just Clock option can be set "ON" or "OFF" at the Clock Set screen (the default setting is "OFF"). Press OK until the Just Clock setting begins blinking, then press %Þ to change the setting.

IMPORTANT: If you turn off Just Clock, the accuracy of your recorder's built-in clock may be reduced, which could adversely effect timer recording. We recommend you to keep Just Clock on. In cases where the clock setting data from a PDC signal is incorrect, however, you are advised to keep Just Clock set to "OFF".

IMPORTANT

If you performed Auto Set Up (☞ pg. 4), Preset Download (☞ pg. 6) or Auto Channel Set (☞ pg. 36), without ever having set the clock previously, the recorder's built-in clock is also set automatically.

Perform the following steps only if —

—Auto Clock Set has not been performed correctly by Auto Set Up, Preset Download or Auto Channel Set.

or

—the recorder's memory backup has expired.

or

—you want to change Just Clock setting (☞ "Just Clock" in the left column).

TURN THE RECORDER ON

1 Press			.
	ACCESS MAIN MENU
	SCREEN
2 Press MENU.
	ACCESS INITIAL SET
	SCREEN
Move the highlight bar (pointer) to "INITIAL SET" by
3 pressing %Þ, then press OK or #.
	ACCESS CLOCK SET
	SCREEN
Move the highlight bar (pointer) to "CLOCK SET" by
	pressing %Þ, then press OK or #. The Clock Set screen
4 appears.
			INITIAL SET			CLOCK SET
		CLOCK SET		SET	TIME	DATE	YEAR
		GUIDE PROG			0: 00	01 . 01	99
					JUST	CLOCK : OFF
					TV PR.	:	1
					[5°] =
		[5°] =
		[MENU] : EXIT			[MENU] : EXIT

NOTE:

When you have selected MAGYARORSZAG (36), CESKA REPUBLIKA (42), POLSKA (48) or OTHER EASTERN EUROPE (EE) for the country setting (☞ pg. 4, 8), you cannot use Just Clock function. Skip steps 6 and 7 on page 43.

SET DATE AND TIME

5 Press %Þ to set the time, then press OK or #. The "date" display begins blinking. Repeat the same procedure to set the date and year.

●When you set the time, press and hold %Þ to change the time by 30 minutes.

●When you set the date, press and hold %Þ to change the date by 15 days.