JVC HR-J313EU Basic Connections, Check Contents, Situate Recorder, Connect Recorder to Mains

Page 3

INSTALLINGYOURNEWRECORDER

EN3

Basic Connections

It's essential that your video recorder be properly connected. Follow these steps carefully. THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED.

CHECK CONTENTS

Make sure the package contains all of the accessories

1 listed in “Specifications” (☞ pg. 51).

SITUATE RECORDER

Aerial terminal

Back of TV

21-pin SCART connector

RF Cable (provided)

21-pin SCART Cable

Mains Power

Cord

TV Aerial Cable

2 Place the recorder on a stable, horizontal surface.
		CONNECT RECORDER TO
3		TV
	The connection method you use depends on the type of
		TV you have.

		RF CONNECTION
		● To Connect To A TV With NO AV Input Terminals . . .
		a– Disconnect the TV aerial cable from the TV.
		b– Connect the TV aerial cable to the ANT. IN jack
		on the rear panel of the recorder.
		c– Connect the provided RF cable between the RF.
		OUT jack on the rear panel of the recorder and the
		TV’s aerial terminal.

AV CONNECTION

●To Connect To A TV With AV Input Terminals . . .

a– Connect the aerial, recorder and TV as per “RF

CONNECTION”.

b– Connect an optional SCART cable between the

AV1 IN/OUT socket on the rear panel of the recorder and the TV’s 21-pin SCART connector.

		ENTREE
		ANT. IN
AV2 ENTREE/DECODEUR	AV1 ENTREE/SORTIE	ANTENNE
IN/DECODER	IN/OUT	SORTIE
		RF OUT

Rear view

Mains outlet	AV1 IN/OUT

CONNECT RECORDER TO MAINS

4 Plug the end of the mains power cord into a mains outlet.

Make AV connection if your TV has a 21-pin AV input connector (SCART) in order to reduce the possibility of interference.

After you plug the mains power cord into a mains outlet, the Country Set display appears on the TV screen and/or on the

recorder's front display panel when the button on the recorder/remote control is pressed for the first time to power on the recorder; go to page 4 to perform Auto Set Up.

Image 3

Contents HR-J313EU Safety Precautions For ItalyDo not place the recorder Connect Recorder to Mains Check ContentsBasic Connections Situate RecorderIf you are referring to the on-screen display Auto Set UpEN Initial Settings If you are referring to the front display panelThis Language CodeVia an RF cable only RF connection Your TV to the Video Channel. Refer toENU Preset DownloadJust Clock on If both auto channel set and auto clock set have failedLanguage for the on-screen display Just ClockLanguage Return to Normal Screen Access Main Menu ScreenENABLE/DISABLE ON-SCREEN Display On-Screen DisplaysPower Save Mode NexTView Link TV Auto Power OnLink Functions LI NKCounter and tape remaining time readings will be incorrect Colour System SetMode About Ntsc PlaybackStart Playback Basic PlaybackLoad a Cassette PointPlayback Features PlaybackSearch Return to Automatic Adjust TrackingOverride Automatic Tracking ManuallyRepeat Playback Access Mode SET ScreenSelect Picture Control SET Mode EN PlaybackBasic Recording Display Remaining Time Recording FeaturesReset Counter Select Channel to WatchPress Record on the recorder Engage ITR ModeInstant Timer Recording ITR SET Recording Duration#to set to on or OFF S.T. Picture SystemPreparation S.T., then press OK orRecording PlaybackOr press Record on the recorder EN Timer Recording Timer ProgrammingSatellite Tuner Users Timer WarningTime Express Timer ProgrammingStart Time Enter Programme StopPress TV Prog + SET VPS/PDC ModeIf no VPS/PDC signal is detected from the station, VPS VPS/PDC RecordingNext programmes Check, Cancel And Replace ProgrammesPress ä Timer Press Again to check More information. Each Time you pressOn or OFF Auto TimerAuto TIMER, then press OK or #to select eitherBefore performing the following steps Select AV2 Select ModeREC Link indicator Automatic Satellite Programme RecordingSET RECORDER’S Input SET Edit ModeEdit From a Camcorder Make ConnectionsStart Source Player Input ModeEdit To Or From Another Video Recorder SET Recording DECK’SPress %Þ to move the highlight bar pointer to AV2 Select AV2 Select SettingAV2 IN/DECODER connector RecorderBack of TV Connection To Satellite TunerEN System Connections Satellite Tuner UnitSet AV2 Select to AV2. pg DecoderSET Tuner Connecting Using a DecoderSelect Input Mode Connect DecoderEnter Receiving Channel Position Number Showview SetupSubsidiary Settings EN NumberAuto Channel Set Access Auto CH SETEN SU Bsidiary Settings Tuner SetView Confirmation Screen Perform Auto Channel SETStoring Channels Manually SU Bsidiary SettingsPress %Þ @ #until the item you want to move begins When Receiving a Scrambled BroadcastDelete a Channel Change Station Channel PositionSwitch Stations Access Manual Channel SET ScreenPerform Tuning Access ManualTV Station And ID List Clock Set Turn the Recorder onSET Date and Time Channel position to the number representing Default setting is OFF. Set as desired by pressingRecorder is preset to receive clock setting SET Just ClockSET RF Output System Access Video Channel SET ModeExit Video Channel SET Mode Video Channel SetTroubleshooting EN Roubleshooting Timer RecordingQuest Ions and Answers EN Ä remain lit on the display panel. Is there Problem?Front View IndexRear View VCR, TV Prog +/-,TV +/-, TV Muting EN IndexSpeci Fications Rotary two-head herical scanIN/OUT x 1, IN/DECODER x Ex. Francais is selected for Belgium Auto Set Up referring to the display panel