JVC HR-J765EK setup guide Delete a Channel, Change Station Preset Position

Page 35

Delete A Channel

Perform steps 1 and 2 of "Storing Channels Manually" on page 34 to access the Confirmation screen before continuing.

1

SELECT ITEM

Press @ #until the item you want to delete begins

blinking.

2

DELETE CHANNEL

Press .

The item directly beneath the cancelled one moves

up one line.

 

Repeat steps 1 and 2 as necessary.

3

CLOSE CONFIRMATION SCREEN

Press MENU.

 

 

Change Station Preset Position

Perform steps 1 and 2 of "Storing Channels Manually" on page 34 to access the Confirmation screen before continuing.

 

SELECT ITEM

 

 

 

 

 

 

 

Press @ #until the item you want to move begins

 

blinking. Then press OK and the station name (ID) and

1 its channel (CH) number begin blinking.

 

 

2

SELECT NEW POSITION

 

 

Press @ #to move the station to the new preset

position, then press OK.

 

 

 

 

 

Example: If you moved the station in position 4 to

 

 

 

 

 

position 2, the stations originally in positions

 

 

 

 

2 and 3 each move down one space.

 

 

 

PR

CH

ID

PR CH

ID

PR

CH

ID

PR CH

ID

 

01

26

BBC1

08

– – – –

01

26

BBC1

08

––––

 

02

23

ITV

09

– – – –

02

33

BBC2

09

––––

 

03

30

CH4

10

– – – –

03

23

ITV

10

––––

 

 

04

33

BBC2

11

– – – –

04

30

CH4

11

––––

 

 

05

37

CH5

12

– – – –

05

37

CH5

12

––––

 

06

 

– – – –

13

– – – –

06

 

––––

13

––––

 

07

 

– – – –

14

– – – –

07

 

––––

14

––––

 

 

 

 

 

 

 

 

 

 

 

[5°55] : MOVE

 

[5°55] : MOVE =

 

 

 

 

: MANUAL CH SET

 

 

 

 

[MENU] : EXIT

 

 

[MENU] : EXIT

 

 

Repeat steps 1 and 2 as necessary.

CLOSE CONFIRMATION SCREEN

3 Press MENU.

35

Fine-Tuning Channels

Already Stored

Perform steps 1 and 2 of "Storing Channels Manually" on page 34 to access the Confirmation screen before continuing.

SELECT CHANNEL TO FINE-TUNE

1 Press @ #until the channel you want to tune begins blinking.

ACCESS MANUAL

CHANNEL SET SCREEN

2 Press OK twice. The Manual Channel Set screen appears.

PERFORM TUNING

3 Press #until "+/–" begins blinking, then press until the picture is clearest. Then press OK.

The Confirmation screen appears.

Repeat steps 1 through 3 as necessary.

CLOSE CONFIRMATION SCREEN

4 Press MENU.

ATTENTION

If channel positions are changed or deleted, the Guide Program numbers that have been set are reset.

Example 1: If a channel is deleted, all the Guide Program numbers are reset.

Example 2: If a channel is changed from position 4 to position 2, the Guide Program numbers above position 4 are reset.

Example 3: If a channel is changed from position 4 to position 6, the Guide Program numbers

above position 6 are reset.

*In Examples 2 and 3, if the channel is moved to position 10 before OK is pressed, the Guide Program numbers above position 10 are reset.

If an attempt is made at timer programming with VIDEO Plus+ in this state, the “GUIDE PROG SET” screen appears; set the Guide Program numbers on this screen. “ATTENTION – Regarding Guide Program Number Set” on pg. 13.

Or perform “Guide Program Number Set” (pg. 40).

Image 35
Contents HR-J765EK Do not place the recorder Safety PrecautionsSome Dos And Donts On The Safe Use Of Equipment Quick SET UP G Uide Back of Recorder Back of TVGo to item Before performing the following procedure, make sure thatYour TV via both an RF cable and a 21-pin If both auto channel set and auto clock set have failed Auto Set Up results appear on the display panelStart Playback PlaybackLoad a Cassette PointActivate HIGH-SPEED Search Pause During PlaybackRecording SET Counter Display Select Preset to WatchReset Counter Engage ITR ModeVideo Plus+ Timer Programming Press SP/LP Timer WarningPDC Recording Satellite Receiver UsersEnter Programme Express Timer ProgrammingAccess Video PLUS+ Screen Start TimePress TV Prog +/- to SET PDC ModeCheck, Cancel And Replace Programmes Adjust Tracking Access Main MenuAccess Mode SET Select Picture Control SET ModeS.T. Picture System Playback/ Recording According To Tape Charac- teristicsTurn on the Recorder Or press Record on the recorder RecordingPlayback During Playback Selecting Sound You WantReceiving Nicam Stereo And Bilingual Programmes Soundtrack SelectionSkip Over Unwanted Looking For Scene You WantActivate Index Search Activate Instant ReviewSatellite Receiver Unit Aerial connectorAutomatic Satellite Programme Recording Outdoor Unit Satellite CableBefore performing the following steps Engage Auto Satellite Prog REC ModePress SP/LP on the remote control to set the tape speed Make Connections SET Recording DECK’S Input ModeSET Edit Mode Edit To Or From Another Video RecorderStart Recorder SET RECORDER’S Input ModeEdit From a Camcorder Start CamcorderOther Functions Access Main Menu ScreenAccess Mode SET Screen ENABLE/DISABLE ON-SCREEN DisplayAuto Timer Select ModeAuto SP→LP Timer Ntsc Playback Activate RepeatPlayback Repeat PlaybackAudio OUT Mains outlet Connection To Stereo SystemTelevision Audio Cable not providedSET Video Channel Access Video CHAN- NEL SET ModeExit Video Channel SET Mode Video Channel SetWith RF Connection Access Video Chan NEL SET ModeAuto Channel Set Tuner SetSET Is displayed on the screen Screen preset positionsProcedures After Scan CompletedStoring Channels Manually Delete a Channel Change Station Preset PositionFine-Tuning Channels Already Stored Close Confirmation Access Manual Channel SET ScreenSwitch Stations Select NEW StationTV Station And ID List TV Station Channel Number Guide Just Clock Clock SetEnter Guide Prog Number Video Plus+ SetupAccess Initial SET Screen Access Guide Prog SET ScreenRemain lit on the display panel. Is there Problem? Questions And AnswersTroubleshooting Check the programmed data and re Cassette with the Record Safety tabBlinking Intact Blinks for 10 seconds Front View IndexTape Speed Indicators display mode of recording light Audio OUT L/R Connectors enableRemote Control VCR, TV Prog +/-,TV +/-, TV Muting Auto Tracking Button enables/disables autoDA4 Double Azimuth helical Maximum recording time