JVC HR-J765EK Looking For Scene You Want, Activate Index Search, Activate Instant Review

Looking For

The Scene

You Want

21

Index Search

Your recorder automatically marks

index codes at the beginning of¢ 2 each recording. This function gives

you quick access to any one of 9 index codes in either direction.

NOTE:

Before starting, make sure the recorder is in the Stop mode.

ACTIVATE INDEX SEARCH

1 Press @or #(4 or ¢). “4 1” or “¢ 1” is displayed on screen and search begins in the corre- sponding direction.

REVIEW

1 2 3

4 5 6

7 8 9

0

1 ?

2

4

30 SEC

●To access index codes 2 through 9, press @or # repeatedly until the correct index number is dis- played.

Ex.: To locate the beginning of B from the current position, press @twice.

To locate the beginning of D from the current position, press #once.

Current position

A B		C	D	E	F
–2		–1	1	2	3
	￿

Index number

●When the specified index code is located, playback begins automatically.

Instant ReView

Simply by pressing a single button, the recorder power comes on, rewinds, and begins playback of the last timer-recorded programme. If you have several programmes recorded, you can easily access any of them.

NOTE:

Before starting, make sure that the recorder is off and that the Timer mode is disengaged.

ACTIVATE INSTANT

REVIEW

1 Press REVIEW. The recorder power comes on and the recorder searches for the index code indicating the start of the last timer-recorded programme. Once it’s found, playback begins automatically.

Skip Search

	SKIP OVER UNWANTED
1	SECTIONS
	Press 30 SEC 1 to 4 times during playback. Each press
	initiates a 30-second period of fast-motion playback.
	Normal playback resumes automatically.

NOTE:

To return to normal playback during a Skip Search, press PLAY.

●The front display panel tells you how many programmes have been timer-recorded. If you have, for example, 3 programmes, “REVIEW” and "3" appear and blink. To watch the first of the 3 programmes, press REVIEW three times. The recorder searches and begins playback automatically. You can access a programme as far as 9 index codes away from the current tape position.

NOTES:

●Instant ReView is not possible while the recorder is in the Timer mode.

●The number of recorded programmes will not be displayed on the front display panel after Auto Satellite Prog recording (☞ pg. 22).