JVC HR-S6711EU specifications Language for the on-screen display, Just Clock

Page 13

EN 13

Results of Auto Set Up/Preset Download appear on the front display panel

If both Auto Channel Set and Auto Clock Set have been performed successfully, the correct current time is displayed.

Turn on the TV and select its video channel or AV mode, then make sure that all necessary stations have been stored in the recorder’s memory by using the PR button(s).

●If station names (ID –  pg. 53) have also been stored in the recorder’s memory, the station name will be displayed at the top left corner of the TV screen for about 5 seconds when the recorder is tuned to a different station.

●If you want to set the tuner manually such as to add or skip channels, to change channel positions, or to set or change station names, see pages 50 – 53.

If Auto Channel Set has succeeded but Auto Clock Set has not, “1” (channel position) is displayed.

ATurn on the TV and select its video channel or AV mode, then make sure that all necessary stations have been stored in the recorder’s memory by using the PR button(s).

●If station names (ID –  pg. 53) have also been stored in the recorder’s memory, the station name will be displayed at the top left corner of the TV screen for about 5 seconds when the recorder is tuned to a different station.

●If you want to set the tuner manually such as to add or skip channels, to change channel positions, or to set or change station names, see pages 50 – 53.

BPerform “Clock Set” on page 56.

If both Auto Channel Set and Auto Clock Set have failed, “– –:– –” is displayed.

Make sure the cables are connected properly and turn off the recorder’s power once, then turn the recorder’s power back on again.

The Country Set display appears on the front display panel and/or on the TV screen; perform “Auto Set Up” on page 10 or “Preset Download” on page 12 again.

IMPORTANT

●To check if the Guide Program numbers have been set correctly, perform the SHOWVIEW Timer Programming ( pg. 28).

●In certain reception conditions, station names may not be stored correctly, and auto Guide Program Number Set may not work properly. If the Guide Program numbers are not set properly when you timer-record a TV programme using the SHOWVIEW

system, the recorder will record a TV programme of a different station. When programming the timer using the SHOWVIEW system, be sure to check the desired channel is selected correctly ( pg. 28, “SHOWVIEW® Timer Programming”).

●Your video recorder memorizes all detected stations even if reception of some of them is poor. You can delete those stations with an unacceptable picture ( pg. 51, “Delete A Channel”).

INFORMATION

Language for the on-screen display

Auto Set Up also selects the language automatically for the on-screen display depending on the Country setting you have made in step 2 on page 10 (unless you have selected BELGIUM or SUISSE), as shown below.

SUOMI

] SUOMI

DANMARK

]

DANSK

NEDERLAND

]

NEDERLANDS

PORTUGAL

] ENGLISH

ÖSTERREICH

]

DEUTSCH

GREECE

]

ENGLISH

DEUTSCHLAND

] DEUTSCH

CESKÁ REPUBLIKA ]

CEcTINA

РОССИЯ

]

ЯЗЫК

POLSKA

] POLSKI

ITALIA

]

ITALIANO

OTHER WESTERN EUROPE]

ENGLISH

NORGE

] NORSK

MAGYARORSZÁG ]

MAGYAR

OTHER EASTERN EUROPE ] ENGLISH

SVERIGE

] SVENSKA

ESPAÑA

]

CASTELLANO

 

 

 

If you want to change the language setting manually, see “Language” on page 14.

Just Clock

Your recorder is equipped with the Just Clock function which provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal. If you want to take advantage of this function, simply set it to “ON”

( pg. 56, “Just Clock”).

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Front Display Panel ON-SCREEN Display Operating JVC TVs How To UseSituate the recorder Check the contentsConnect the recorder to TV Connect the recorder to mainsVideo Connection To connect to a TV with S-VIDEO/AUDIO in connectors 10 EN Auto Set Up Turn on the recorder Select your countrySelect the language Perform Auto Set UpPress rt to select your language code Press rt to select Auto and press OK or e12 EN Perform Preset DownloadSet the video channel Press rt to select CH - and press OK or eJust Clock Language for the on-screen displayAccess the Country Set screen Access the Main Menu screenLanguage 14 ENSituate the Satellite Controller Installing Satellite ControllerAttach the Satellite Controller Make connections16 EN Setting satellite receivers brand and channelNexTView Link TV Auto Power OnVCR Auto Standby Direct Rec 18 EN Basic PlaybackVariable Speed Search Slow MotionPause during playback Activate frame-by-frame playbackSkip Search 20 ENHigh-Speed Turbo Search Instant ReViewNext Function Memory Index SearchManual Tracking Repeat Playback 22 ENSoundtrack Selection Activate Repeat PlaybackChoose a programme Recording Resume FunctionSet the tape speed Start recordingEngage the ITR mode Instant Timer Recording ITR24 EN Watching AnotherEngage the S-VHS ET mode Reset the counterTape Remaining Time Set the counter displayType of Broadcast On-screen Display Being Received Receiving Stereo and Bilingual ProgrammesRecording PlaybackAccess the Showview Program screen Access the Showview screenBefore performing the Showview Timer Programming 28 ENEngage the recorder’s timer mode Set the VPS/PDC modeSatellite Receiver Users Guide Program Number Set30 EN Express Timer ProgrammingVPS/PDC Recording To Timer-Record Weekly Or Daily SerialsEnter the channel position Press PR+32 EN Confirm the overlapping programmes Cancel or change programme settingSelect the programme to modify Overlapping programmes blink on the TV screenRecording mode Select the L-2 Select modeProgramme Recording 34 ENCamcorder Edit From aPress rt to move Access the Output/Input Set screenHighlight bar pointer to OUTPUT/INPUT SET, thenDecoder connector Select and L-2 Input Setting38 EN Another Video RecorderYour recorder Recorder Simple Connections Connecting To a Satellite ReceiverPerfect Connections 42 EN Select the input modeConnect the decoder Set the tunerMake connections Connecting/Using a Stereo SystemAccess the Mode Set screen Mode SetSelect the mode Select the mode settingThis feature helps you to adjust the playback picture You can set the B.E.S.T. Biconditional Equalised SignalWhen this function is set to ON, the timer is Off, and automatically disengaged when the recorder isFor Example 46 ENAbout Ntsc Playback Tuner Set Access the Auto Channel Set screen48 EN Auto Channel SetView the Confirmation screen Perform Auto Channel SetPress OK twice Manual Channel Set 50 ENDelete a Channel When Receiving a Scrambled BroadcastSet Stations a 52 ENSet Stations B Station Name TV Station And ID ListExit the Video Channel Set mode Access the Video Channel Set modeVideo Channel Set 54 ENGuide Program Number Set Showview SetupGuide Program Number Enter the Guide Program numberClock Set Access the Clock Set screen56 EN Set Just Clock Set the date and timeSet the source channel position for clock data Start the clock operation58 EN TroubleshootingRecording 60 EN Other ProblemsPlayback 62 EN Connecting To a Satellite Receiver Delete a Channel Auto Channel Set Auto Set UpPreset Download Timer warning display Tuner SetCountry code International telephone Language code
Top Page Image Contents