JVC HR-S6711EU specifications About Ntsc Playback

Page 47

 

EN 47

 

* The default setting is bold in the table below.

 

 

8 S-VHS

Your recorder can record in S-VHS (Super VHS), S-VHS ET

ON

or VHS.

OFF

To record in S-VHS:

 

 

Set “S-VHS” to “ON”. Then, insert a cassette marked

 

“S-VHS”. The S-VHS indicator lights up on the front

 

display panel.

 

The S-VHS recording mode is selected.

 

To record in S-VHS ET on a VHS cassette:

 

See “Super VHS ET (S-VHS ET)” on page 25.

 

To record in VHS:

 

Insert a cassette marked “VHS”.

 

If the S-VHS ET button on the recorder is lit and S-VHS ET

 

mode is activated, press S-VHS ET. The button’s light goes

 

off.

 

The VHS recording mode is automatically selected

 

regardless of the “S-VHS” mode setting.

 

To record in VHS on an S-VHS cassette:

 

Insert a cassette marked “S-VHS”. The S-VHS indicator

 

lights up on the front display panel. Then, set “S-VHS” to

 

“OFF”. The S-VHS indicator goes off.

 

The VHS recording mode is selected.

 

NOTE:

 

When playing back a tape that has been recorded in S-VHS or

 

S-VHS ET, the S-VHS indicator lights up on the front display panel

 

regardless of the “S-VHS” mode setting.

 

 

8 COLOUR SYSTEM

You can play back PAL, NTSC and MESECAM tapes, or

PAL/NTSC: To record PAL signals, or play back a

record PAL and SECAM* signals on this recorder. Select the

PAL or NTSC tape.

appropriate colour system.

MESECAM: To record SECAM signals, or play

* SECAM signals will be recorded as MESECAM on this recorder;

back a MESECAM tape.

MESECAM is the designation for tapes with SECAM signals that

 

have been recorded on a MESECAM-compatible PAL video

 

cassette recorder.

 

NOTES:

 

About NTSC Playback

 

Some TVs shrink the picture vertically and place black bars at

 

the top and bottom of the TV screen. This is not a malfunction

 

on the part of either the video recorder or the TV.

 

The picture may roll up and down. This can be corrected using

 

the V-HOLD control found on some TVs. (This cannot be

 

corrected if the TV does not have a V-HOLD control.)

 

The counter and tape remaining time readings will be incorrect.

 

During search, still, or frame-by-frame playback, the picture will

 

be distorted, and there may be a loss of colour.

 

Depending on the type of TV, the top and bottom portions of

 

superimposed displays may be cut off during NTSC playback.

 

 

Image 47
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Front Display Panel ON-SCREEN Display Operating JVC TVs How To UseConnect the recorder to mains Check the contentsSituate the recorder Connect the recorder to TVVideo Connection To connect to a TV with S-VIDEO/AUDIO in connectorsSelect your country Auto Set Up10 EN Turn on the recorderPress rt to select Auto and press OK or e Perform Auto Set UpSelect the language Press rt to select your language codePress rt to select CH - and press OK or e Perform Preset Download12 EN Set the video channelJust Clock Language for the on-screen display14 EN Access the Main Menu screenAccess the Country Set screen LanguageMake connections Installing Satellite ControllerSituate the Satellite Controller Attach the Satellite Controller16 EN Setting satellite receivers brand and channelVCR Auto Standby Direct Rec TV Auto Power OnNexTView Link 18 EN Basic PlaybackActivate frame-by-frame playback Slow MotionVariable Speed Search Pause during playbackInstant ReView 20 ENSkip Search High-Speed Turbo SearchManual Tracking Index SearchNext Function Memory Activate Repeat Playback 22 ENRepeat Playback Soundtrack SelectionStart recording Recording Resume FunctionChoose a programme Set the tape speedWatching Another Instant Timer Recording ITREngage the ITR mode 24 ENSet the counter display Reset the counterEngage the S-VHS ET mode Tape Remaining TimeType of Broadcast On-screen Display Being Received Receiving Stereo and Bilingual ProgrammesRecording Playback28 EN Access the Showview screenAccess the Showview Program screen Before performing the Showview Timer ProgrammingGuide Program Number Set Set the VPS/PDC modeEngage the recorder’s timer mode Satellite Receiver Users30 EN Express Timer ProgrammingPress PR+ To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the channel position32 EN Overlapping programmes blink on the TV screen Cancel or change programme settingConfirm the overlapping programmes Select the programme to modify34 EN Select the L-2 Select modeRecording mode Programme RecordingCamcorder Edit From aOUTPUT/INPUT SET, then Access the Output/Input Set screenPress rt to move Highlight bar pointer toDecoder connector Select and L-2 Input Setting38 EN Another Video RecorderYour recorder Recorder Simple Connections Connecting To a Satellite ReceiverPerfect Connections Set the tuner Select the input mode42 EN Connect the decoderMake connections Connecting/Using a Stereo System Select the mode setting Mode Set Access the Mode Set screen Select the modeOff, and automatically disengaged when the recorder is You can set the B.E.S.T. Biconditional Equalised SignalThis feature helps you to adjust the playback picture When this function is set to ON, the timer isFor Example 46 ENAbout Ntsc Playback Auto Channel Set Access the Auto Channel Set screenTuner Set 48 ENPress OK twice Perform Auto Channel SetView the Confirmation screen Manual Channel Set 50 ENDelete a Channel When Receiving a Scrambled BroadcastSet Stations B 52 ENSet Stations a Station Name TV Station And ID List54 EN Access the Video Channel Set modeExit the Video Channel Set mode Video Channel SetEnter the Guide Program number Showview SetupGuide Program Number Set Guide Program Number56 EN Access the Clock Set screenClock Set Start the clock operation Set the date and timeSet Just Clock Set the source channel position for clock data58 EN TroubleshootingRecording 60 EN Other ProblemsPlayback 62 EN Timer warning display Tuner Set Auto Channel Set Auto Set UpConnecting To a Satellite Receiver Delete a Channel Preset DownloadCountry code International telephone Language code