JVC HR-S6711EU specifications Edit From a, Camcorder

EDITING	EN 35
Edit From A	You can use a camcorder as the source player and your
	recorder as the recording deck.
Camcorder	A Make connections.
	... connect the camcorder’s AUDIO OUT and VIDEO
	A If the camcorder has no S-VIDEO output connector ...
A If the camcorder has no S-VIDEO output connector ...	OUT connectors to the recorder’s front panel AUDIO
	and VIDEO input connectors.
Your recorder	B If the camcorder has an S-VIDEO output connector ...
	... connect the camcorder’s AUDIO OUT and
	S-VIDEO OUT connectors to the recorder’s front panel
	AUDIO and S-VIDEO input connectors.
	● When using a monaural camcorder, connect its AUDIO OUT
	connector to the AUDIO L input connector on your recorder.
	B Set the recorder’s input mode.
	Press AUX (NUMBER key “0”) and/or PR to select “F-1”
AUDIO input	for the AUDIO and VIDEO input connectors, or “S-1” for
VIDEO	the AUDIO and S-VIDEO input connectors, depending
input	on the connectors being used.
Audio cable (not provided)	C Set the edit mode.
Video cable (not provided)
	See “PICTURE CONTROL” on page 45.
VIDEO OUT
	D Start the camcorder.
Camcorder	Engage the Play mode of the camcorder.
AUDIO OUT
Player	E Start the recorder.
	Engage the Record mode of the recorder.
B If the camcorder has an S-VIDEO output connector ...	NOTES:
Your recorder	● All necessary cables can be obtained from your dealer.
	● When you select “EDIT” to dub tapes in step 3, be sure to
	select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”)
	after you finish dubbing the tapes.

AUDIO input

S-VIDEO input

Audio cable (not provided)

S-Video cable (not provided)

S-VIDEO OUT

Camcorder

AUDIO OUT

Player