JVC HR-S6711EU specifications Index Search, Next Function Memory, Manual Tracking

Page 21

EN 21

Index Search

Your recorder automatically marks index codes at the beginning of each recording. This function gives you quick access to any one of 9 index codes in either direction.

NOTE:

Before starting, make sure the recorder is in the Stop mode.

Activate Index Search.

Press w or e (2 or 6). “2 1” or “6 1” is displayed on the TV screen and search begins in the corresponding direction.

●To access index codes 2 through 9, press w or e repeatedly until the correct index number is displayed.

Example:

To locate the beginning of B from the current position, press w twice.

To locate the beginning of D from the current position, press e once.

Current position

Index number

●When the specified index code is located, playback begins automatically.

Next Function Memory

The Next Function Memory “tells” the recorder what to do after rewinding. Before continuing, make sure the recorder is in the Stop mode.

a- For Automatic Start Of Playback

Press 3, then press 4 within 2 seconds. b- For Automatic Power Off

Press 3, then press 1 within 2 seconds. c- For Automatic Timer Standby

Press 3, then press # (TIMER) within 2 seconds.

Manual Tracking

Your video recorder is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the PR buttons.

1Override automatic tracking.

Press p on the remote control.

2Adjust the tracking manually.

Press PR + or –.

3Return to automatic tracking.

Press p on the remote control.

NOTE:

When a new tape is inserted, the recorder enters the automatic tracking mode automatically.

Image 21

Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Front Display Panel ON-SCREEN Display Operating JVC TVs How To UseSituate the recorder Check the contentsConnect the recorder to TV Connect the recorder to mainsVideo Connection To connect to a TV with S-VIDEO/AUDIO in connectors10 EN Auto Set UpTurn on the recorder Select your countrySelect the language Perform Auto Set UpPress rt to select your language code Press rt to select Auto and press OK or e12 EN Perform Preset DownloadSet the video channel Press rt to select CH - and press OK or eJust Clock Language for the on-screen displayAccess the Country Set screen Access the Main Menu screenLanguage 14 ENSituate the Satellite Controller Installing Satellite ControllerAttach the Satellite Controller Make connections16 EN Setting satellite receivers brand and channelTV Auto Power On NexTView LinkVCR Auto Standby Direct Rec 18 EN Basic PlaybackVariable Speed Search Slow MotionPause during playback Activate frame-by-frame playbackSkip Search 20 ENHigh-Speed Turbo Search Instant ReViewIndex Search Next Function MemoryManual Tracking Repeat Playback 22 ENSoundtrack Selection Activate Repeat PlaybackChoose a programme Recording Resume FunctionSet the tape speed Start recordingEngage the ITR mode Instant Timer Recording ITR24 EN Watching AnotherEngage the S-VHS ET mode Reset the counterTape Remaining Time Set the counter displayType of Broadcast On-screen Display Being Received Receiving Stereo and Bilingual ProgrammesRecording PlaybackAccess the Showview Program screen Access the Showview screenBefore performing the Showview Timer Programming 28 ENEngage the recorder’s timer mode Set the VPS/PDC modeSatellite Receiver Users Guide Program Number Set30 EN Express Timer ProgrammingVPS/PDC Recording To Timer-Record Weekly Or Daily SerialsEnter the channel position Press PR+32 EN Confirm the overlapping programmes Cancel or change programme settingSelect the programme to modify Overlapping programmes blink on the TV screenRecording mode Select the L-2 Select modeProgramme Recording 34 ENCamcorder Edit From aPress rt to move Access the Output/Input Set screenHighlight bar pointer to OUTPUT/INPUT SET, thenDecoder connector Select and L-2 Input Setting38 EN Another Video RecorderYour recorder Recorder Simple Connections Connecting To a Satellite ReceiverPerfect Connections 42 EN Select the input modeConnect the decoder Set the tunerMake connections Connecting/Using a Stereo SystemAccess the Mode Set screen Mode SetSelect the mode Select the mode settingThis feature helps you to adjust the playback picture You can set the B.E.S.T. Biconditional Equalised SignalWhen this function is set to ON, the timer is Off, and automatically disengaged when the recorder isFor Example 46 ENAbout Ntsc Playback Tuner Set Access the Auto Channel Set screen48 EN Auto Channel SetPerform Auto Channel Set View the Confirmation screenPress OK twice Manual Channel Set 50 ENDelete a Channel When Receiving a Scrambled Broadcast52 EN Set Stations aSet Stations B Station Name TV Station And ID ListExit the Video Channel Set mode Access the Video Channel Set modeVideo Channel Set 54 ENGuide Program Number Set Showview SetupGuide Program Number Enter the Guide Program numberAccess the Clock Set screen Clock Set56 EN Set Just Clock Set the date and timeSet the source channel position for clock data Start the clock operation58 EN TroubleshootingRecording 60 EN Other ProblemsPlayback 62 EN Connecting To a Satellite Receiver Delete a Channel Auto Channel Set Auto Set UpPreset Download Timer warning display Tuner SetCountry code International telephone Language code