JVC HR-S6711EU specifications Check the contents, Situate the recorder, Connect the recorder to TV

Page 8

8 EN

INSTALLING YOUR NEW RECORDER

Basic Connections

Aerial connector

Back of TV

21-pin SCART

connector

TV aerial cable

 

21-pin SCART

 

cable

RF cable

(not provided)

 

(provided)

Mains power cord

ANT. IN

Back of recorder

AV1 (L-1) IN/OUT RF OUT

Mains outlet

Make AV connection if your TV has a 21-pin AV input connector (SCART) in order to reduce the possibility of interference. With AV connection, you can enjoy stereo playback of video tapes if you are using a stereo TV.

NOTES:

●The AV1 (L-1) IN/OUT connector accepts and delivers either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated). If your TV’s 21-pin AV input connector (SCART) is compatible with the Y/C signal, set

“L-1 OUTPUT” to “S-VIDEO” after the connection and the initial settings are completed ( pg. 36). You can obtain high-quality S-VHS pictures. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

●Set your TV to the VIDEO (or AV), Y/C, or RGB mode according to the type of your TV’s SCART connector.

●For switching the TV’s mode, refer to the instruction manual of your television.

●To obtain high-quality S-VHS pictures, you can also use the S-VIDEO connection described on page 9.

It’s essential that your video recorder be properly connected.

THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED.

A Check the contents.

Make sure the package contains all of the accessories listed in “SPECIFICATIONS” on page 62.

B Situate the recorder.

Place the recorder on a stable, horizontal surface.

C Connect the recorder to TV.

The connection method you use depends on the type of TV you have.

RF Connection

8To connect to a TV with NO AV input connectors . . .

ADisconnect the TV aerial cable from the TV.

BConnect the TV aerial cable to the ANT. IN connector on the rear panel of the recorder.

CConnect the provided RF cable between the RF OUT connector on the rear panel of the recorder and the TV’s aerial connector.

AV Connection

8To connect to a TV with AV input connectors . . .

AConnect the aerial, recorder and TV as per “RF Connection”.

BConnect an optional 21-pin SCART cable between the AV1 (L-1) IN/OUT connector on the rear panel of the recorder and the TV’s 21-pin SCART connector.

D Connect the recorder to mains.

Plug the end of the mains power cord into a mains outlet.

After the connection is completed, perform “Auto Set Up” on page 10.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Front Display Panel ON-SCREEN Display How To Use Operating JVC TVsCheck the contents Situate the recorderConnect the recorder to TV Connect the recorder to mainsTo connect to a TV with S-VIDEO/AUDIO in connectors Video ConnectionAuto Set Up 10 ENTurn on the recorder Select your countryPerform Auto Set Up Select the languagePress rt to select your language code Press rt to select Auto and press OK or ePerform Preset Download 12 ENSet the video channel Press rt to select CH - and press OK or eLanguage for the on-screen display Just ClockAccess the Main Menu screen Access the Country Set screenLanguage 14 ENInstalling Satellite Controller Situate the Satellite ControllerAttach the Satellite Controller Make connectionsSetting satellite receivers brand and channel 16 ENVCR Auto Standby Direct Rec TV Auto Power OnNexTView Link Basic Playback 18 ENSlow Motion Variable Speed SearchPause during playback Activate frame-by-frame playback20 EN Skip SearchHigh-Speed Turbo Search Instant ReViewManual Tracking Index SearchNext Function Memory 22 EN Repeat PlaybackSoundtrack Selection Activate Repeat PlaybackRecording Resume Function Choose a programmeSet the tape speed Start recordingInstant Timer Recording ITR Engage the ITR mode24 EN Watching AnotherReset the counter Engage the S-VHS ET modeTape Remaining Time Set the counter displayReceiving Stereo and Bilingual Programmes Type of Broadcast On-screen Display Being ReceivedPlayback RecordingAccess the Showview screen Access the Showview Program screenBefore performing the Showview Timer Programming 28 ENSet the VPS/PDC mode Engage the recorder’s timer modeSatellite Receiver Users Guide Program Number SetExpress Timer Programming 30 ENTo Timer-Record Weekly Or Daily Serials VPS/PDC RecordingEnter the channel position Press PR+32 EN Cancel or change programme setting Confirm the overlapping programmesSelect the programme to modify Overlapping programmes blink on the TV screenSelect the L-2 Select mode Recording modeProgramme Recording 34 ENEdit From a CamcorderAccess the Output/Input Set screen Press rt to moveHighlight bar pointer to OUTPUT/INPUT SET, thenSelect and L-2 Input Setting Decoder connectorAnother Video Recorder 38 ENYour recorder Recorder Connecting To a Satellite Receiver Simple ConnectionsPerfect Connections Select the input mode 42 ENConnect the decoder Set the tunerConnecting/Using a Stereo System Make connectionsMode Set Access the Mode Set screenSelect the mode Select the mode settingYou can set the B.E.S.T. Biconditional Equalised Signal This feature helps you to adjust the playback pictureWhen this function is set to ON, the timer is Off, and automatically disengaged when the recorder is46 EN For ExampleAbout Ntsc Playback Access the Auto Channel Set screen Tuner Set48 EN Auto Channel SetPress OK twice Perform Auto Channel SetView the Confirmation screen 50 EN Manual Channel SetWhen Receiving a Scrambled Broadcast Delete a ChannelSet Stations B 52 ENSet Stations a TV Station And ID List Station NameAccess the Video Channel Set mode Exit the Video Channel Set modeVideo Channel Set 54 ENShowview Setup Guide Program Number SetGuide Program Number Enter the Guide Program number56 EN Access the Clock Set screenClock Set Set the date and time Set Just ClockSet the source channel position for clock data Start the clock operationTroubleshooting 58 ENRecording Other Problems 60 ENPlayback 62 EN Auto Channel Set Auto Set Up Connecting To a Satellite Receiver Delete a ChannelPreset Download Timer warning display Tuner SetInternational telephone Language code Country code
Top Page Image Contents