16 EN | SAT CONTROL SET (cont.) |
Setting satellite receiver's brand and channel
After installation, set the satellite receiver’s brand and channel correctly; otherwise, the Satellite Controller cannot work correctly.
Turn on the TV and select the video channel (or AV mode).
A Turn on the satellite receiver.
Turn on the satellite receiver’s power.
B Access the Main Menu screen on the recorder.
C Access the Initial Set screen.
Press rt to move the highlight bar (pointer) to “INITIAL SET”, then press OK or e.
D Access the Sat Control Set screen.
Press rt to move the highlight bar (pointer) to “SAT CONTROL SET”, then press OK or e.
E Enter the satellite receiver’s brand.
Press the appropriate NUMBER keys to enter the brand code from the list on page 17, then press OK.
●If the brand code you entered is invalid, the code field will be reset. Enter the correct
brand code again.
● If the recorder is in playback or
recording mode, you cannot set the brand code.
F Select the satellite receiver’s channel for testing.
Press the appropriate NUMBER keys to enter one of the channel positions on the satellite receiver, then press OK.
●You can select the channel position between 1 to 999.
● After pressing OK, the recorder enters the Test mode.
Press MENU.