JVC HR-S6711EU Recording Resume Function, Choose a programme, Set the tape speed, Start recording

Page 23

RECORDING

EN 23

Basic Recording

Turn on the TV and select the video channel (or AV mode).

Recording Resume Function

If there is a power outage during recording, Instant Timer Recording ( pg. 24) or timer recording ( pg. 28, 30), the recording will resume automatically when power is restored to the recorder unless the recorder’s memory backup has expired.

A Load a cassette.

Insert a cassette with the record safety tab intact.

●The recorder’s power comes on automatically and the counter is reset to “0:00:00”.

B Choose a programme.

Press PR +/– or the NUMBER keys to select the channel you wish to record.

C Set the tape speed.

Press SP/LP (p). Check the SP/LP indicator on the recorder’s front display panel to confirm the selected tape speed.

D Start recording.

Press and hold 7 and press 4 on the remote control, or press 7 on the recorder.

B.E.S.T. takes place at the beginning of both the first SP and the first LP recording after inserting the cassette. ( pg. 27)

If “DIRECT REC” is set to “ON”, the programme that appears on the TV screen will be recorded ( pg. 45).

E Pause/Resume recording.

Press 9. Press 4 to resume recording.

F Stop recording.

Press 8 on the remote control or 0 on the recorder. Then press 0 to remove the cassette.

Accidental erasure prevention

To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.

Record safety tab

Image 23

Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Front Display Panel ON-SCREEN Display Operating JVC TVs How To UseConnect the recorder to mains Check the contentsSituate the recorder Connect the recorder to TVVideo Connection To connect to a TV with S-VIDEO/AUDIO in connectorsSelect your country Auto Set Up10 EN Turn on the recorderPress rt to select Auto and press OK or e Perform Auto Set UpSelect the language Press rt to select your language codePress rt to select CH - and press OK or e Perform Preset Download12 EN Set the video channelJust Clock Language for the on-screen display14 EN Access the Main Menu screenAccess the Country Set screen LanguageMake connections Installing Satellite ControllerSituate the Satellite Controller Attach the Satellite Controller16 EN Setting satellite receivers brand and channelVCR Auto Standby Direct Rec TV Auto Power OnNexTView Link 18 EN Basic PlaybackActivate frame-by-frame playback Slow MotionVariable Speed Search Pause during playback Instant ReView 20 EN Skip Search High-Speed Turbo SearchManual Tracking Index SearchNext Function Memory Activate Repeat Playback 22 ENRepeat Playback Soundtrack SelectionStart recording Recording Resume FunctionChoose a programme Set the tape speedWatching Another Instant Timer Recording ITREngage the ITR mode 24 ENSet the counter display Reset the counterEngage the S-VHS ET mode Tape Remaining TimeType of Broadcast On-screen Display Being Received Receiving Stereo and Bilingual ProgrammesRecording Playback28 EN Access the Showview screenAccess the Showview Program screen Before performing the Showview Timer ProgrammingGuide Program Number Set Set the VPS/PDC modeEngage the recorder’s timer mode Satellite Receiver Users30 EN Express Timer ProgrammingPress PR+ To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the channel position32 EN Overlapping programmes blink on the TV screen Cancel or change programme settingConfirm the overlapping programmes Select the programme to modify34 EN Select the L-2 Select modeRecording mode Programme RecordingCamcorder Edit From aOUTPUT/INPUT SET, then Access the Output/Input Set screenPress rt to move Highlight bar pointer toDecoder connector Select and L-2 Input Setting38 EN Another Video RecorderYour recorder Recorder Simple Connections Connecting To a Satellite ReceiverPerfect Connections Set the tuner Select the input mode42 EN Connect the decoderMake connections Connecting/Using a Stereo SystemSelect the mode setting Mode SetAccess the Mode Set screen Select the modeOff, and automatically disengaged when the recorder is You can set the B.E.S.T. Biconditional Equalised SignalThis feature helps you to adjust the playback picture When this function is set to ON, the timer isFor Example 46 ENAbout Ntsc Playback Auto Channel Set Access the Auto Channel Set screenTuner Set 48 ENPress OK twice Perform Auto Channel SetView the Confirmation screen Manual Channel Set 50 ENDelete a Channel When Receiving a Scrambled BroadcastSet Stations B 52 ENSet Stations a Station Name TV Station And ID List54 EN Access the Video Channel Set modeExit the Video Channel Set mode Video Channel SetEnter the Guide Program number Showview SetupGuide Program Number Set Guide Program Number56 EN Access the Clock Set screenClock Set Start the clock operation Set the date and timeSet Just Clock Set the source channel position for clock data58 EN TroubleshootingRecording 60 EN Other ProblemsPlayback 62 EN Timer warning display Tuner Set Auto Channel Set Auto Set UpConnecting To a Satellite Receiver Delete a Channel Preset DownloadCountry code International telephone Language code