JVC HR-S6711EU specifications Another Video Recorder, 38 EN

Page 38

38 EN

EDITING (cont.)

Edit To Or From

Another Video

Recorder

Advantages of S-VHS video recorders

You can edit from VHS to S-VHS, S-VHS to VHS, or, from S-VHS to S-VHS.

●From VHS to S-VHS: Record VHS playback signals in the S-VHS mode. Although the picture quality is inherently limited by that of the original, the edited tape has better picture quality than those made by VHS-to-VHS editing.

●From S-VHS to VHS: Because the picture quality of the source material is very high, the edited tape has better picture quality than those made by VHS-to-VHS editing.

●From S-VHS to S-VHS: All signals will be transferred with minimum degradation.

You can use your recorder as the source player or as the recording deck.

A Make connections.

Connect the player’s 21-pin SCART connector to the recorder’s 21-pin SCART connector as illustrated on page 39.

AWhen using your recorder as the source player ...

... connect its AV1 (L-1) IN/OUT connector to the recording deck.

BWhen using your recorder as the recording deck ...

... connect its AV1 (L-1) IN/OUT or AV2 (L-2) IN/ DECODER connector to the source player.

CIf another recorder is compatible with the Y/C signal ...

... connect your recorder’s AV1 (L-1) IN/OUT

connector to another recorder.

With C connection ...

●When using your recorder as the recording deck, set “L-1 INPUT” to “S-VIDEO” and “L-2 SELECT” to “A/V” ( pg. 36, 37).

●When using your recorder as the source player, set “L-1 OUTPUT” to “S-VIDEO” ( pg. 36).

B Set the input mode of recording deck.

With this video recorder, press AUX (NUMBER key “0”) and/or PR to select “L-1” for the AV1 (L-1) IN/OUT connector, or “L-2” for the AV2 (L-2) IN/DECODER connector, depending on the connector being used.

●When using another recorder as the recording deck, refer to its instruction manual.

●When using the AV2 (L-2) IN/DECODER connector, set “L-2 SELECT” to “A/V” ( pg. 37).

C Set the edit mode.

See “PICTURE CONTROL” on page 45.

D Start the source player.

Engage the Play mode of the source player.

E Start the recording deck.

Engage the Record mode of the recording deck.

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Front Display Panel ON-SCREEN Display How To Use Operating JVC TVsConnect the recorder to TV Check the contentsSituate the recorder Connect the recorder to mainsTo connect to a TV with S-VIDEO/AUDIO in connectors Video ConnectionTurn on the recorder Auto Set Up10 EN Select your countryPress rt to select your language code Perform Auto Set UpSelect the language Press rt to select Auto and press OK or eSet the video channel Perform Preset Download12 EN Press rt to select CH - and press OK or eLanguage for the on-screen display Just ClockLanguage Access the Main Menu screenAccess the Country Set screen 14 ENAttach the Satellite Controller Installing Satellite ControllerSituate the Satellite Controller Make connectionsSetting satellite receivers brand and channel 16 ENVCR Auto Standby Direct Rec TV Auto Power OnNexTView Link Basic Playback 18 ENPause during playback Slow MotionVariable Speed Search Activate frame-by-frame playbackHigh-Speed Turbo Search 20 ENSkip Search Instant ReViewManual Tracking Index SearchNext Function Memory Soundtrack Selection 22 ENRepeat Playback Activate Repeat PlaybackSet the tape speed Recording Resume FunctionChoose a programme Start recording24 EN Instant Timer Recording ITREngage the ITR mode Watching AnotherTape Remaining Time Reset the counterEngage the S-VHS ET mode Set the counter displayReceiving Stereo and Bilingual Programmes Type of Broadcast On-screen Display Being ReceivedPlayback RecordingBefore performing the Showview Timer Programming Access the Showview screenAccess the Showview Program screen 28 ENSatellite Receiver Users Set the VPS/PDC modeEngage the recorder’s timer mode Guide Program Number SetExpress Timer Programming 30 ENEnter the channel position To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Press PR+32 EN Select the programme to modify Cancel or change programme settingConfirm the overlapping programmes Overlapping programmes blink on the TV screenProgramme Recording Select the L-2 Select modeRecording mode 34 EN Edit From a CamcorderHighlight bar pointer to Access the Output/Input Set screenPress rt to move OUTPUT/INPUT SET, thenSelect and L-2 Input Setting Decoder connectorAnother Video Recorder 38 ENYour recorder Recorder Connecting To a Satellite Receiver Simple ConnectionsPerfect Connections Connect the decoder Select the input mode42 EN Set the tunerConnecting/Using a Stereo System Make connectionsSelect the mode Mode SetAccess the Mode Set screen Select the mode settingWhen this function is set to ON, the timer is You can set the B.E.S.T. Biconditional Equalised SignalThis feature helps you to adjust the playback picture Off, and automatically disengaged when the recorder is46 EN For ExampleAbout Ntsc Playback 48 EN Access the Auto Channel Set screenTuner Set Auto Channel SetPress OK twice Perform Auto Channel SetView the Confirmation screen 50 EN Manual Channel SetWhen Receiving a Scrambled Broadcast Delete a ChannelSet Stations B 52 ENSet Stations a TV Station And ID List Station NameVideo Channel Set Access the Video Channel Set modeExit the Video Channel Set mode 54 ENGuide Program Number Showview SetupGuide Program Number Set Enter the Guide Program number56 EN Access the Clock Set screenClock Set Set the source channel position for clock data Set the date and timeSet Just Clock Start the clock operationTroubleshooting 58 ENRecording Other Problems 60 ENPlayback 62 EN Preset Download Auto Channel Set Auto Set UpConnecting To a Satellite Receiver Delete a Channel Timer warning display Tuner SetInternational telephone Language code Country code
Top Page Image Contents