JVC HR-S6711EU specifications Basic Playback, 18 EN

Page 18

18 EN

PLAYBACK

Basic Playback

Turn on the TV and select the video channel (or AV mode).

A Load a cassette.

Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointed toward the recorder.

●Don’t apply too much pressure when inserting.

●The recorder’s power comes on automatically and the counter is reset to “0:00:00”.

●If the record safety tab has been removed, playback begins automatically.

B Find the programme start point.

If the tape is advanced past the start point, press 3 or turn the SHUTTLE ring to the left. To go forward, press 5 or turn the SHUTTLE ring to the right.

C Start playback.

Press 4. “BEST” appears blinking in the recorder’s front display panel during automatic tracking. ( pg. 27)

D Stop playback.

Press 8 on the remote control or 0 on the recorder’s front panel. Then press 0 to remove the cassette.

Clean the video heads using a dry cleaning cassette — TCL-2UX — when:

●Rough, poor picture appears while a tape is played back.

●The picture is unclear or no picture appears.

●“USE CLEANING CASSETTE” appears on the screen (only with “O.S.D.” set to “ON” ( pg. 45)).

Usable cassettes

●Compact VHS camcorder recordings can be played on this video recorder. Simply place the recorded cassette into a VHS Cassette Adapter and it can be used just like any full-sized VHS cassette.

●This video recorder can record on regular VHS and Super VHS cassettes. While only VHS signals can be recorded on regular VHS cassettes*, both VHS and Super VHS signals can be recorded and played back using Super VHS

cassettes.

*By using the S-VHS ET function, it is possible to record and play back with S-VHS picture quality on VHS cassettes with this recorder.

Image 18

Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Front Display Panel ON-SCREEN Display How To Use Operating JVC TVsConnect the recorder to TV Check the contentsSituate the recorder Connect the recorder to mainsTo connect to a TV with S-VIDEO/AUDIO in connectors Video ConnectionTurn on the recorder Auto Set Up10 EN Select your countryPress rt to select your language code Perform Auto Set UpSelect the language Press rt to select Auto and press OK or eSet the video channel Perform Preset Download12 EN Press rt to select CH - and press OK or eLanguage for the on-screen display Just ClockLanguage Access the Main Menu screenAccess the Country Set screen 14 EN Attach the Satellite Controller Installing Satellite Controller Situate the Satellite Controller Make connectionsSetting satellite receivers brand and channel 16 ENTV Auto Power On NexTView LinkVCR Auto Standby Direct Rec Basic Playback 18 ENPause during playback Slow MotionVariable Speed Search Activate frame-by-frame playbackHigh-Speed Turbo Search 20 ENSkip Search Instant ReViewIndex Search Next Function MemoryManual Tracking Soundtrack Selection 22 ENRepeat Playback Activate Repeat PlaybackSet the tape speed Recording Resume FunctionChoose a programme Start recording24 EN Instant Timer Recording ITREngage the ITR mode Watching AnotherTape Remaining Time Reset the counterEngage the S-VHS ET mode Set the counter displayReceiving Stereo and Bilingual Programmes Type of Broadcast On-screen Display Being ReceivedPlayback RecordingBefore performing the Showview Timer Programming Access the Showview screenAccess the Showview Program screen 28 ENSatellite Receiver Users Set the VPS/PDC modeEngage the recorder’s timer mode Guide Program Number SetExpress Timer Programming 30 ENEnter the channel position To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Press PR+32 EN Select the programme to modify Cancel or change programme settingConfirm the overlapping programmes Overlapping programmes blink on the TV screenProgramme Recording Select the L-2 Select modeRecording mode 34 ENEdit From a CamcorderHighlight bar pointer to Access the Output/Input Set screenPress rt to move OUTPUT/INPUT SET, thenSelect and L-2 Input Setting Decoder connectorAnother Video Recorder 38 ENYour recorder Recorder Connecting To a Satellite Receiver Simple ConnectionsPerfect Connections Connect the decoder Select the input mode42 EN Set the tunerConnecting/Using a Stereo System Make connectionsSelect the mode Mode SetAccess the Mode Set screen Select the mode settingWhen this function is set to ON, the timer is You can set the B.E.S.T. Biconditional Equalised SignalThis feature helps you to adjust the playback picture Off, and automatically disengaged when the recorder is46 EN For ExampleAbout Ntsc Playback 48 EN Access the Auto Channel Set screenTuner Set Auto Channel SetPerform Auto Channel Set View the Confirmation screenPress OK twice 50 EN Manual Channel SetWhen Receiving a Scrambled Broadcast Delete a Channel52 EN Set Stations aSet Stations B TV Station And ID List Station NameVideo Channel Set Access the Video Channel Set modeExit the Video Channel Set mode 54 ENGuide Program Number Showview SetupGuide Program Number Set Enter the Guide Program numberAccess the Clock Set screen Clock Set56 EN Set the source channel position for clock data Set the date and timeSet Just Clock Start the clock operationTroubleshooting 58 ENRecording Other Problems 60 ENPlayback 62 EN Preset Download Auto Channel Set Auto Set UpConnecting To a Satellite Receiver Delete a Channel Timer warning display Tuner SetInternational telephone Language code Country code