JVC HR-S6711EU specifications 20 EN, Skip Search, High-Speed Turbo Search, Instant ReView

Page 20

20 EN

PLAYBACK (cont.)

Skip Search

During playback, press 30 SEC 1 to 4 times to skip over unwanted sections.

Each press initiates a 30-second period of fast-motion playback. Normal playback resumes automatically.

To resume normal playback during a Skip Search, press 4.

High-Speed (Turbo) Search

During playback or still, turn the SHUTTLE ring all the way to the right for forward high-speed search, or to the left for reverse high-speed search. Releasing SHUTTLE ring resumes still picture playback.

●For forward high-speed search, turn the SHUTTLE ring all the way to the right and release it within 1 second.

●For reverse high-speed search, turn the SHUTTLE ring all the way to the left and release it within 1 second.

OR

During playback or still, press 5for forward high-speed search, or 3for reverse high-speed search.

NOTE:

For short searches, press and hold 5or 3for over 2 seconds during playback or still picture. When released, normal playback resumes.

To resume normal playback, press 4.

Instant ReView

Simply by pressing a single button, the recorder power comes on, rewinds, and begins playback of the last timer-recorded programme. If you have several programmes recorded, you can easily access any of them.

NOTE:

Before starting, make sure that the recorder is off and that the Timer mode is disengaged.

Activate Instant ReView.

Press REVIEW. The recorder power comes on and the recorder searches for the index code indicating the start of the last timer-recorded programme. Once it’s found, playback begins automatically.

●The front display panel tells you how many programmes have been timer-recorded. If you have, for example, 3 programmes, “REVIEW” and “3” appear and blink. To watch the first of the 3 programmes, press REVIEW three times. The recorder searches and begins playback automatically. You can access a programme as far as 9 index codes away from the current tape position.

●Instant ReView is not possible while the recorder is in the Timer mode.

●The number of recorded programmes will not be displayed on

the front display panel after Automatic Satellite Programme Recording ( pg. 34).

Image 20

Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Front Display Panel ON-SCREEN Display How To Use Operating JVC TVsCheck the contents Situate the recorderConnect the recorder to TV Connect the recorder to mainsTo connect to a TV with S-VIDEO/AUDIO in connectors Video ConnectionAuto Set Up 10 ENTurn on the recorder Select your countryPerform Auto Set Up Select the languagePress rt to select your language code Press rt to select Auto and press OK or ePerform Preset Download 12 ENSet the video channel Press rt to select CH - and press OK or eLanguage for the on-screen display Just ClockAccess the Main Menu screen Access the Country Set screenLanguage 14 ENInstalling Satellite Controller Situate the Satellite ControllerAttach the Satellite Controller Make connectionsSetting satellite receivers brand and channel 16 EN VCR Auto Standby Direct Rec TV Auto Power On NexTView Link Basic Playback 18 ENSlow Motion Variable Speed SearchPause during playback Activate frame-by-frame playback20 EN Skip SearchHigh-Speed Turbo Search Instant ReViewManual Tracking Index SearchNext Function Memory 22 EN Repeat PlaybackSoundtrack Selection Activate Repeat PlaybackRecording Resume Function Choose a programmeSet the tape speed Start recordingInstant Timer Recording ITR Engage the ITR mode24 EN Watching AnotherReset the counter Engage the S-VHS ET modeTape Remaining Time Set the counter displayReceiving Stereo and Bilingual Programmes Type of Broadcast On-screen Display Being ReceivedPlayback RecordingAccess the Showview screen Access the Showview Program screenBefore performing the Showview Timer Programming 28 ENSet the VPS/PDC mode Engage the recorder’s timer modeSatellite Receiver Users Guide Program Number SetExpress Timer Programming 30 ENTo Timer-Record Weekly Or Daily Serials VPS/PDC RecordingEnter the channel position Press PR+32 EN Cancel or change programme setting Confirm the overlapping programmesSelect the programme to modify Overlapping programmes blink on the TV screenSelect the L-2 Select mode Recording modeProgramme Recording 34 ENEdit From a CamcorderAccess the Output/Input Set screen Press rt to moveHighlight bar pointer to OUTPUT/INPUT SET, thenSelect and L-2 Input Setting Decoder connectorAnother Video Recorder 38 ENYour recorder Recorder Connecting To a Satellite Receiver Simple ConnectionsPerfect Connections Select the input mode 42 ENConnect the decoder Set the tunerConnecting/Using a Stereo System Make connectionsMode Set Access the Mode Set screenSelect the mode Select the mode settingYou can set the B.E.S.T. Biconditional Equalised Signal This feature helps you to adjust the playback pictureWhen this function is set to ON, the timer is Off, and automatically disengaged when the recorder is46 EN For ExampleAbout Ntsc Playback Access the Auto Channel Set screen Tuner Set48 EN Auto Channel SetPress OK twice Perform Auto Channel SetView the Confirmation screen 50 EN Manual Channel SetWhen Receiving a Scrambled Broadcast Delete a ChannelSet Stations B 52 ENSet Stations a TV Station And ID List Station NameAccess the Video Channel Set mode Exit the Video Channel Set modeVideo Channel Set 54 ENShowview Setup Guide Program Number SetGuide Program Number Enter the Guide Program number56 EN Access the Clock Set screenClock Set Set the date and time Set Just ClockSet the source channel position for clock data Start the clock operationTroubleshooting 58 ENRecording Other Problems 60 ENPlayback 62 EN Auto Channel Set Auto Set Up Connecting To a Satellite Receiver Delete a ChannelPreset Download Timer warning display Tuner SetInternational telephone Language code Country code