EN 11
E Automatic operations after
rewinding — Next Function Memory
The Next Function Memory tells the VCR what to do after rewinding is complete.
●Ensure that the VCR is in stop mode. a– For Automatic Playback Start
Press [REW ( 1 )], then press [PLAY ( 3 )] within 2 seconds.
b– For Automatic Power Off
Press [REW ( 1 )], then press [POWER] within 2 seconds.
F Locating beginning of recordings
— Index Search
When recording on this VCR, index codes are placed on the tape at the beginning of each recording. You can find and automatically play back from the beginning of any recording using the Index Search function.
1 Start search
While the tape is not running, press [4] or [¢] on the Remote.
2 Access distant code
To access a recording of 2 to 9 index codes away, press [4] or [¢] repeatedly until the correct number is displayed on the screen (only if “SUPERIMPOSE” is set to “ON” ( page 39)). Playback begins automatically when the desired recording is located.
Beginning of the current |
|
|
|
| Current position |
| Beginning of the 2nd | ||||||
program recorded |
|
|
|
|
|
| on the tape |
|
|
|
| next program recorded | |
Previous |
|
|
|
|
|
|
| Next | 2nd |
|
| next | |
|
|
|
|
|
|
|
|
| |||||
program |
|
|
|
|
|
|
| program |
| ||||
recorded |
|
|
|
|
|
|
| recorded |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
| 1 | 2 |
|
| 3 | |||||||
|
|
|
| ||||||||||
4 ¢
●If you want to find the very beginning of the
desired program, press [REW ( 
)] or
[FF ( 
)] after playback starts.
NOTE:
An index code is not placed on the tape when recording is resumed from recording pause.
G Skipping unwanted portions
— Skip Search
You can skip over (view at high speed) unwanted portions of the tape.
Press [SKIP SEARCH] on the Remote once to 4 times during playback.
Each press initiates a
To return to normal playback during Skip Search, press
[PLAY ( 3 )].
NOTE:
It is not possible to perform the Skip Search when you play back a
Other Useful functions for playback (S-VHS/VHS only)
You can also use the following functions for playback.
●“V. CALIBRATION” ( page 36)
When this function is set to “ON”, this VCR checks the condition of the tape in use during playback and recording, and compensates to provide the
●“PICTURE CONTROL” ( page 36)
This function helps you to adjust the playback picture quality according to your preference.
●“DIGITAL R3” ( page 36)
This function applies edge correction to the luminance signal to enhance details and provides clear pictures.
●“VIDEO STABILIZER” ( page 36)
You can automatically correct vertical vibrations in the picture when playing back unstable recordings made on anotherVCR.
H Repeating wanted portions
— Skip Back
You can skip back (view at high speed) wanted portions of the tape.
Press ‘Number’ key (1, 2 or 3) on the Remote during playback.
Each press initiates specified portion period of high speed rewind. When the specified portion of the tape is rewound, normal playback resumes automatically.
Number key | Rewind Time |
1about 05 seconds
2about 10 seconds
3about 30 seconds