EN 9
Basic
Playback
Features
●Turn on the VCR and the TV, and select the AV mode on the TV.
●Set the [VCR/TV/CABLE/DBS] selector on the Remote to [VCR].
B
IN |
+ |
A Checking tape position
The tape position indicator
appears on the screen in the 
B 
E following cases:
●When you change the VCR operation mode from the stop mode to fast forward or rewind mode.
●When you perform an
Index Search ( page 11).
The position of “ 
” in relation to “B” (Beginning) or “E” (End) shows you where you are on the tape.
NOTES:
●“SUPERIMPOSE” must be set to “ON”, or the indicator will not appear ( page 39).
●It may take a few seconds for the tape position indicator to be displayed.
To reset the time counter, press [C. RESET] on the Remote. The counter reading becomes “0:00:00”. It is also reset when a tape is inserted.
VCR CABLE 
TV /DBS
C
[POWER]
B Playing back tape repeatedly
— Repeat Playback
You can play back a tape repeatedly (50 times).
While playing back a tape, press and hold [PLAY ( 3 )] for more than 5 seconds.
The play indicator [#] on the front display panel starts flashing slowly, and a tape will be played back 50 times. To stop playback, press [STOP ( 7 )] on the Remote or [STOP/EJECT ( 7 /0 )] on the front panel.
C
H 
[C.RESET]
[SKIP SEARCH]
B E G
[REW (1 )]
[FF ( ¡ )]
[STOP ( 7 )]
[ 4 ]
[¢ ]
NOTE:
For a cassette recorded in
D