JVC SR-VD400E VIDEO/VIDEO Connections, Connect VCR to power source, Final preparation for use

6 EN INSTALLING YOUR NEW VCR (cont.)

Aerial or cable	Digital HD Video
	Camera (JY-HD10)

S-VIDEO/VIDEO Connections

First follow Preparations on page 5, then go to the following steps.

1Make connections

— Connect VCR to TV

Refer to 1 ‘Connect VCR to TV’ on page 5.

	— Connect VCR to the Digital HD Video
	Camera (JY-HD10)
TV (HD Ready)	Connect an audio/S-video cable between the
To [S/AV]	VCR’s [AUDIO/S VIDEO IN] connectors and JY-
	HD10’s [S/AV] connectors.

	S/AV/Editing
Component	cable (not
	supplied)
Video Cable (not
supplied)	To [AUDIO
	IN]
Audio cable	To front
(supplied)
	input
	connectors

2

3

—Connect VCR to another VCR (SR-VD400E)

Connect an audio/S-video cable between the playback VCR’s [AUDIO/S VIDEO OUT] connectors and the recording VCR’s [AUDIO/ S VIDEO IN] connectors.

Connect VCR to power source

Connect the AC power plug to the AC outlet.

Final preparation for use

Turn on the VCR.

		Y	PB/CB	PR/CR
		OUT			IN
		S VIDEO		IN(L-1)	S VIDEO
REMOTE PAUSE/	R AUDIO L	VIDEO	R	AUDIO L	VIDEO
AV COMPULINK
				IN(L-2)

Back of VCR

[AUDIO OUT]

●You can now perform ‘basic playback’ (
page 8) or ‘editing’ (
page 18).

i.LINK IN/OUT DV IN

S400

DIGITAL OUT

OPTICAL

PCM/DOLBY DIGITAL

To [AUDIO			To [S VIDEO
IN]			IN]
Audio cable			S-video
			cable
(supplied)
			(supplied)
To			To [S VIDEO
[AUDIO
			OUT]
OUT]
Y	PB/CB PR/CR
		IN	i.LINK IN/OUT
			DV IN
S	IN(L-1)	S VIDEO	S400
			DIGITAL OUT
			OPTICAL
REMOTE PAUSE/R AUDIO L VIDEO	R AUDIO L	VIDEO	PCM/DOLBY DIGITAL
AV COMPULINK
	IN(L-2)

Another D-VHS Digital Recorder (SR-VD400E)

NOTES:

●To operate the VCR with your TV using the component or S-video connection, set your TV to the AV mode using the TV's Remote.

You can also use the [TV/VCR] button on the VCR’s Remote to set your TV to the AV mode (
page 45).

●If you cannot see the pictures on the TV screen when you play back a tape, set “TV OUTPUT 1” to the appropriate mode (
page 38).