JVC SR-VD400E manual Specifications

Page 59

Signal-to-noise ratio Frequency range

Normal audio Hi-Fi audio

SPECIFICATIONS

EN 59

GENERAL

Power requirement	: AC 220 V-240 V , 50/60 Hz
Power consumption
Power on	: 42 W
Power off	: 18 W
Temperature
Operating	: 5°C to 40°C (41°F to 104°F)
Storage	: Ð20°C to 60°C (Ð4°F to 140°F)
Operating position	: Horizontal only
Dimensions (W x H x D)	: 435 mm x 94 mm x 383 mm
	(17-3/16" x 3-3/4" x 15-1/8")
Weight	: 5.5 kg (12.2 lbs)
Maximum recording time
D-VHS (HS)	: 210 min. with DF-420 video
	cassette
D-VHS (STD)	: 420 min. with DF-420 video
	cassette
D-VHS (LS3)	: 1260 min. with DF-420 video
	cassette
D-VHS (LS5)	: 2100 min. with DF-420 video
	cassette
S-VHS/VHS (SP)	: 210 min. with ST-210 video
	cassette
S-VHS/VHS (EP)	: 630 min. with ST-210 video
	cassette
VIDEO/AUDIO (D-VHS)
Video format	: MPEG2 standard
Audio format	: Encode MPEG1 Layer2
	Decode MPEG1 Layer2/
	Dolby Digital /
Track composition	LINEAR PCM (HS/STD)
Track composition
Tape speed	: 33.4 mm/sec (HS mode)
	16.67 mm/sec (STD mode)
	5.55 mm/sec (LS3 mode)
	3.33 mm/sec (LS5 mode)
Head azimuth	: ±30 deg
Drum rotation	: 1800 rpm
Tracking system	: CTL track system
Recording specification
Main data input rate	: 28.2 Mbps (HS mode)
	14.1 Mbps (STD mode)
	4.7 Mbps (LS3 mode)
	2.8 Mbps (LS5 mode)
Interface	: IEEE1394 compliant
	DTCP digital copy protection
	compatible
VIDEO/AUDIO (S-VHS/VHS)
Format	: S-VHS/VHS NTSC standard
Signal system	: NTSC-type color signal and EIA
	monochrome signal, 525 lines/

60fields

Recording/Playback system: DA-4 (Double Azimuth) head

helical scan system : 45 dB

: 70 Hz to 10,000 Hz

: 20 Hz to 20,000 Hz

TIMER

Clock reference	: Quartz
Memory backup time	: Approx. 10 min.
CONNECTORS
Input/Output	: i.LINK IN/OUT (DV IN) x 2
	(4-pin, S400)
	RCA connectors
	(IN x 3, OUT x 2)
	S-video connectors
	(IN x 3, OUT x 2)
	Component video OUT
	(Y, PB/CB, PR/CR) x 1
	Digital OUT
	(optical) x 1
ACCESSORIES
Provided accessories	: Infrared remote control unit,
	AA battery x 2,
	Audio cable,
	S-video cable (4-pin)

Specifications shown are for SP mode unless specified otherwise.

E. & O.E. Design and specifications subject to change without notice.

Image 59

Contents SR-VD400E Link cable Safety PrecautionsOn placing the unit Symptoms of dirty video headsDo not block the unit’s ventilation openings or holes To mobile phone usersContents Make connections ConnectionsPreparations Link ConnectionsCamera JY-HD10 Connect VCR to power sourceVIDEO/VIDEO Connections Final preparation for useSetting clock manually Clock SettingStart playback Basic PlaybackLoad a cassette Repeat Playback Basic Playback FeaturesChecking tape position Playing back tape repeatedlyActivate manual tracking Adjusting tracking condition10 EN Selecting monitor soundRepeating wanted portions Access distant codeAutomatic operations after Skipping unwanted portionsSubtitle Selection 12 ENProgram Selection Angle SelectionHigh-Speed Picture Search Special Effect PlaybackPlay Picture SearchPause during playback 14 ENViewing still picture Viewingframe still picture frame byDuring normal playback Viewing slow motion pictureTV/VCR CH + Play Pause Slow Motion Playback S-VHS/VHS onlyREW FF D-VHS indicator lights up16 EN Load a D-VHS cassetteInput password number Select input location i.LINK Editing18 EN VHS EditingSTD Set recording speedStart recording About Recording SpeedSelect video input terminal 20 ENVHS/VHS Editing Select input location on this VCROther useful functions for recording Compatibility Of Cassettes And Recording ModeTo use a Master Edit Control-equipped JVC Ntsc camcorder Various connections for editing tapesSpecifying recording length Editing Features22 EN Changing display informationAuto Recording Set timer program on Ntsc deviceEngage Auto Recording standby mode Make sure the record safety tab is intactSelect program Access Video Navigation screenNavigation Playback 24 ENReturn to normal screen Access Navigation Set Up screenDeactivating Video Navigation Deactivate Video NavigationFinding by tape number Finding Tapes26 EN Confirm lists Finding by program titleFinding by category Confirm lists 28 ENFinding by recording date Prepare for recording Access Blank Space List screenFinding blank space Set condition Select blankEditing tape title Editing Titles30 EN Press the ‘Number’ Access edit screenEnter title Ex. Enter JVC NewsEntering or Editing program title 32 ENDeleting tape information Editing program categoryDelete program information 34 ENDeleting program information Checking memorySelect Function Menu Useful Function SettingsAccess Function Set Up screen Change settingInserting a tape Video settings Video FunctionDefault setting is bold in the table below 36 ENÒstandardó Audio settings Audio FunctionWhen there are four DV audio channels 32 kHz When there are two DV audio channels 48 kHzNo Conv 38 ENAppears on the screen Additional settings AdditionalAutomatically when receiving a channel not in use VCR only 40 ENOffnote 42 EN Link Set UpLink set up for connected device Link Branched Connection What is i.LINK?Link Connection Examples Link Connection44 EN Jlip ID Number SettingSelect Jlip ID Set Up screen Set TV brand code SettingTV Brand Turn on the TV46 EN Changing Remote Control CodeTroubleshooting Editng 48 ENOther Problems 50 EN 108 102103 105What happens if the tape reaches its end during recording? 52 ENCan the VCR indefinitely remain in still mode? Index List of terms 54 EN@#$ Front panelFront display panel 56 ENRear panel On-screen display Remote How to use the Remote58 EN Specifications SR-VD400E