44 EN | OTHER USEFUL FUNCTIONS (cont.) |
JLIP ID Number Setting
●Turn on the VCR and the TV, and select the AV mode on the TV.
●Set the [VCR/TV/CABLE/DBS] selector on the Remote to [VCR].
VCR CABLE
TV /DBS
The JLIP (Joint Level Interface Protocol) terminal is used to connect the VCR to a personal computer or similar device. By connecting through the JLIP terminals, you can control the VCR during editing and certain other operations, from the connected personal computer or similar device.
When connecting this VCR to another device using the JLIP terminals, each device must have a different JLIP ID number.
The JLIP ID number of this VCR is preset to “1” when shipped from the factory. You can change this number to any other number between 1 to 99.
To change the JLIP ID number of this VCR, follow the procedure below.
1Access Main Menu screen
Press [MENU].
2 Select JLIP ID Set Up screen |
1 Press [@ #] to move the arrow to “INITIAL SET |
UP”, then press [fi] or [OK]. |
2Press [@ #] to move the arrow to “OTHER”, then press [fi] or [OK].
14 | 23 |
|
3Set JLIP ID Number
Press [%fi] to move the arrow to “JLIP ID”.
Press [@ #] to enter the desired ID number.
FUNCTION SET UP | INITIAL SET UP | |
CLOCK SET |
| OTHER |
JLIP ID | 1 | |
LINC | AUTO | |
RESET NUMBER | ||
MENU | OK | SELECT WITH ARROW KEYS |
EXIT | SELECT | THEN PRESS [OK] |
| ||
4Return to normal screen
Press [MENU].