EN 19
5 Set recording speed
Press [REC SPEED]/[SPEED] to set the recording speed.
●The recording speed changes each time [REC SPEED]/[SPEED] is pressed.
6Start playback
Press [PLAY ( 3 )] on the connected device.
NOTE:
If the connected device is equipped with a superimpose/OSD disable feature then set it to “OFF” before starting playback.
| “AUTO” : When recording in HS or STD mode |
|
|
| |||
|
| is selected automatically according to |
| Start recording | |||
|
| the amount of data input (transfer | 7 On the front panel: | ||||
|
| rate) of the program. |
|
| Press [REC ( ¶ )]. | ||
| “HS” | : When picture quality and sound |
|
| |||
|
|
| On the Remote: | ||||
|
| quality is important. |
|
| |||
| “STD” | : When picture quality and recording |
| While holding [REC ( ¶ )], press [PLAY ( 3 )]. | |||
|
| time are important. |
|
|
|
| |
|
|
|
| NOTE: | |||
| “LS3” | : To record for three times longer than |
| ||||
|
| in STD mode, with picture quality |
| If “108 REC BY HS MODE” appears on the TV screen, | |||
|
| that is equal to or better than | refer to ‘Error Codes and Messages’ on page 51. | ||||
| “LS5” | : When recording time is important. |
|
|
| ||
|
| To record for five times longer than in |
|
|
| ||
|
| STD mode. |
|
| Do not connect this VCR to the PC with the | ||
| For more details, refer to ‘About Recording |
|
| i.LINK cable. The operation is not guaranteed. | |||
|
|
|
|
| |||
|
|
|
|
| |||
| Speed’ below. |
|
|
|
| ||
|
|
|
|
|
|
|
|
About Recording Speed |
|
|
|
| |||
|
|
|
|
|
|
| |
| Input Source |
|
| Selectable Recording Speed |
| ||
| (Playback device) |
| (Recording device: This VCR) |
| |||
|
|
|
|
|
|
| |
|
|
|
| Auto (HS/STD/LS3/LS5)*, HS, STD, LS3, LS5 |
| ||
|
|
|
|
|
|
| |
| i.Link input | Digital HD camcorder (MPEG2) |
| Auto (HS/STD)*, HS |
| ||
|
| Digital HD camcorder (DV format) |
| HS, STD, LS3, LS5 |
| ||
|
|
|
|
|
|
|
|
* Auto mode: The recording speed will be selected automatically according to the amount of data input (the transfer rate) from the i.LINK connector.
NOTES:
● When dubbing using the i.LINK connector, set the recording speed on the recording VCR to the same speed as the source tape on the playback VCR.
● When “AUTO” is selected for the recording speed, “AUTO” and the selected speed appear on the front display panel in turn.