Compur Installation and electrical connections, Compur Statox 4120 operation, Trouble shooting

Page 3

Compur Statox 4120

Contents
		Seite
1.	Important notice	4
2.	The Statox 4120 System: Purpose of use and description	4
2.1	Statox 4120 sensor head	5
2.2	Statox 4120 rack	6
2.3	Statox 4120 control module	8
2.4	Diagnostic box	9
3.	Installation and electrical connections	10
3.1	Statox 4120 sensor head	10
3.1.1	Mounting	10
3.1.2 Connecting the signal cable		11
3.2	Statox 4120 rack	13
3.3	Statox 4120 control module	14
3.4	Switch positions of the sensor head pcb	15
4.	Compur Statox 4120 operation	18
4.1	Start - up	18
4.2	Alarm thresholds	18
4.3	Detection mode	18
4.4	Self test of the system	18
4.5	Manually triggered self test of the system	19
4.6	System failure	19
5.	Trouble shooting	19
5.1	Using the diagnostic box	20
5.1.1 Operation and error codes of the diagnostic box		20
5.1.2 Status messages of the sensor head		21
6.	Maintenance and calibration	22
6.1	Inspection Statox 4120 sensor head	22
6.2	Sensor head calibration	23
6.2.1	Using span gas	23
6.2.2	Use ex-works calibration	24
7.	The maintenance request option	25
8.	The option analog output inhibition	28
9.	The option zero adjustment	29
10.	Technical data	30
11.	Accessories and spare parts	32
Addendum: Declaration of conformity		34

3

Image 3

Contents Compur Statox Compur Statox Compur Statox 4120 operation Installation and electrical connectionsTrouble shooting Maintenance and calibrationStatox 4120 system Purpose of use and description Important noticeStatox 4120 sensor head Statox 4120 rack Operation principleAreas Connections ConstructionLED SF 8 „System Fail Statox 4120 control moduleBargraph display LED SR 7 „System readyDiagnostic box Installation and electrical connections Statox 4120 sensor headMounting Connecting the signal cable Sensor head connection procedure Example of cable specificationsStatox 4120 rack Installation instructionsStatox 4120 control module Switch positions of the sensor head pcb Slide switch S1Toggle switch S3 Switch position for H2S Switch position for HCNSwitch position for COCl2 Switch position for Cl2 Switch position for COSwitch position for HCl Switch position for ClO2 Start up Alarm thresholdsDetection mode Compur Statox 4120 operationSystem failure Trouble shootingSF flashing Manually triggered self test of the systemDiagnostic box error messages Using the diagnostic boxOperation and error codes of the diagnostic box Diagnostic box queries Button DisplayCompur Statox Inspection Statox 4120 Sensor head Maintenance and calibrationSensor head calibration Filter cartridge replacementGenerator cell replacement Using span gasProcedure This is the last opportunity to abort the procedureUse ex works calibration Maintenace request option Key Mode Relay PCS Relay WB Analog signal Reading Error C3 Too low sensitivity during self testMounting the maintenance request pcb Service mode control moduleBridge Analog 20 mA 40-20mA Analog Terminal Solder straps Option analog output inhibitionSystem requirements Sensor head Technical data General Gas Measuring rangeDiagnostic box Control moduleRack Accessories and spare parts Art. NrArt.Nr Sensors & Generator Cells 558435