Compur Statox 4120
2.3 Statox 4120 control module
Each Statox 4120 Control module has its own power supply. The intrinsically safe sensor head supply circuit is supplied by a separate secondary winding.
| pic.4: Statox 4120 Rack | ||
1 | 19“ Rack | 9 | LED A1 |
2 | Statox 4120 control module | 10 | LED A2 |
3 | Button A2 | 11 | Potentiometer for A2 |
4 | Button A1 | 12 | Potentiometer A1 |
5 | Button T | 13 | Bar graph display |
6 | Button R | 14 | Blind panel |
7 | LED SR | 15 | Rail |
8 | LED SF | 16 | ppm Scale |
Bargraph display (13)
-Actual measured concentration value.
-Flashing when measuring range is exceeded and pump is on.
LED SR (7) „System ready“
-On if system is working properly.
-Flashing after power up until system is communicating fault - free.
-Flashing while diagnostic box is connected.
LED SF (8) „System Fail“
-On if a system failure has occurred. (Self test not passed, communication error, cable interrupted).
8