Compur 4120 operation manual Technical data General Gas Measuring range, Sensor head

Page 30

Compur Statox 4120

10. Technical data General:

Gas	Measuring range
Cl2	0-1.5 ppm, 0-3 ppm, 0-10 ppm
CO	0-150 ppm
COCl2	0-0.1 ppm, 0-0.3 ppm, 0-0.5 ppm, 0-1.5 ppm, 0-15 ppm, 0-100 ppm
HCN	0-15 ppm, 0-30 ppm, 0-50 ppm, 0-100 ppm
HCl	0-100 ppm
H2S	0-30 ppm, 0-50 ppm, 0-100 ppm
ClO2	0-0.5 ppm
NO2	0-15 ppm
SO2	0-5 ppm
Accuracy at TLV:	+/- 10 %
Alarms:	2 adjustable alarm thresholds, system alarm
RFI:	CE conform
Manufacturer:	Compur Monitors, Munich

Sensor head:

Type:	5330 xxx (xxx: measuring range / gas)
Weight:	1.9 kg
Dimensions (mm, HxBxT):	180x300x180
Operating temperature:	-20 to +40 oC
Storage temperature:	-30 to +50oC
Humidity:	20-95 % r.H. (not condensing)
Pressure:	800-1200 hPa
Protection class:	IP53
Approvals (div.countries):	Cl2, COCl2, H2S
Explosion protection:	EEx ib IIC T6
Operating environment :	II 2 G
Operating voltage Ui:	max. 22 VDC
Operating current Ii:	max. 50 mADC
Internal capacity Ci:	55 nF
Internal inductivity Li:	0 mH

30

Image 30

Contents Compur Statox Compur Statox Maintenance and calibration Installation and electrical connectionsTrouble shooting Compur Statox 4120 operationImportant notice Statox 4120 system Purpose of use and descriptionStatox 4120 sensor head Statox 4120 rack Operation principleAreas Construction ConnectionsLED SR 7 „System ready Statox 4120 control moduleBargraph display LED SF 8 „System FailDiagnostic box Installation and electrical connections Statox 4120 sensor headMounting Connecting the signal cable Example of cable specifications Sensor head connection procedureInstallation instructions Statox 4120 rackStatox 4120 control module Switch positions of the sensor head pcb Slide switch S1Toggle switch S3 Switch position for H2S Switch position for HCNSwitch position for COCl2 Switch position for Cl2 Switch position for COSwitch position for HCl Switch position for ClO2 Compur Statox 4120 operation Alarm thresholdsDetection mode Start upManually triggered self test of the system Trouble shootingSF flashing System failureDiagnostic box queries Button Display Using the diagnostic boxOperation and error codes of the diagnostic box Diagnostic box error messagesCompur Statox Maintenance and calibration Inspection Statox 4120 Sensor headUsing span gas Filter cartridge replacementGenerator cell replacement Sensor head calibrationProcedure This is the last opportunity to abort the procedureUse ex works calibration Maintenace request option Service mode control module Error C3 Too low sensitivity during self testMounting the maintenance request pcb Key Mode Relay PCS Relay WB Analog signal ReadingBridge Analog 20 mA 40-20mA Option analog output inhibition Analog Terminal Solder strapsSystem requirements Technical data General Gas Measuring range Sensor headDiagnostic box Control moduleRack Accessories and spare parts Art. NrArt.Nr Sensors & Generator Cells 558435