Chapter 1. Overview of RISC-to-RISC Upgrades and Data Migrations
The road map lists important considerations and activities that are critical to the successful model upgrade of a system. Although this road map is not designed to be an all inclusive
This road map also covers how to perform a model to model data migration. A data migration can be performed from almost any iSeries 400 model to any model. The source model must be at the same release as the new model to correctly complete the data migration. Data migration involves a new system with a new serial number.
For an overview of the
What is in this Road Map?
This road map covers the following
Note: The current system may require hardware upgrades or configuration changes to satisfy capacity and compatibility requirements of new software and hardware.
vIBM AS/400 Model 170 to IBM AS/400 Model 170
There are no upgrades into or out of a Model 170. The Data Migration section of this book covers the procedure used to perform a data move from the source system to the new iSeries model.
vIBM ~iSeries Model 270 to IBM ~iSeries Model 270
There are no upgrades into or out of a Model 270. The Data Migration section of this book covers the procedure used to perform a data move from the source system to the new iSeries model.
vIBM AS/400 Models 5xx to IBM AS/400 Models 7xx
vIBM AS/400 Models 6xx to IBM AS/400 Models 7xx
vIBM AS/400 Models 7xx to IBM AS/400 Models 7xx
vIBM AS/400 Models Sxx or IBM AS/400 Models 5xx to IBM ~iSeries
Models 8xx
There are no model upgrades into a Model 8xx from a Model 5xx, 6xx, Sxx, or SBx. However, some hardware may be moved from the 5xx into a migration I expansion unit (I/O and disk unit). The Data Migration section of this book covers the procedure used to perform a data move from the source system to the new iSeries 400 model.
vIBM AS/400 Models 6xx to IBM ~iSeries Models 8xx
vIBM AS/400 Models 7xx to IBM ~iSeries Models 8xx
vIBM ~iSeries Models 8xx to IBM ~iSeries Models 8xx
© Copyright IBM Corp. 1997, 2001 | 1 |