Dish Network Solo 301 manual Leased Equipment

Page 101

Appendix

E. Your DISH Network receiver contains components and software that are proprietary to DISH Network. You agree that you will not try to reverse-engineer, decompile or disassemble any software or hardware contained within your receiver or our Smart Card. Such actions are strictly prohibited and may result in the termination of this Agreement, disconnection of your Services and/or legal action.

F. To optimize the operation of your Equipment, you must connect each DISH Network receiver on your account to a land-based telephone line. For accounts containing multiple receivers, each receiver must be continuously connected to the same land-based telephone line. Failure to connect each receiver to the same land-based telephone line may result in interruption or disconnection of Services.

G. If your Equipment is stolen or otherwise removed from your premises without your authorization, you must notify our Customer Service Center immediately, but in any event not more than three (3) business days after such removal to avoid liability for payment for unauthorized use of your Equipment. You will not be liable for unauthorized use that occurs after we have received your notification.

H. You are licensed to use the software provided in your DISH Network receiver(s), as updated by DISH Network from time to time, solely in executable code form and solely in conjunction with lawful operation of the DISH Network receiver(s) that you purchased or leased. You may not copy, modify or transfer any software provided in your DISH Network receiver(s), or any copy thereof, in whole or in part. You may not reverse engineer, disassemble, decompile or translate such software, or otherwise attempt to derive its source code, except to the extent allowed under any applicable laws. Any attempt to transfer any of the rights, duties or obligations of this license agreement is null and void. You may not rent, lease, load, resell for profit or distribute any software provided in your DISH Network receiver(s), or any part thereof. Such software is licensed, not sold, to you for use only under the terms and conditions of this license agreement, and DISH Network and its suppliers reserve all rights not expressly granted to you. Except as stated above, this license agreement does not grant to you any intellectual property rights in the software. If you breach any term or condition of this license agreement, this license agreement will terminate immediately upon notice to you.

5. LEASED EQUIPMENT

A. DISH Network may, from time to time, lease certain Equipment to subscribers. If you elect to lease Equipment from DISH Network, the terms and conditions of the applicable promotional lease agreement shall apply, which are in addition to (and without limitation of) the terms and conditions of this Agreement. Unless otherwise provided in your promotional lease agreement, such Equipment shall at all times remain the sole and exclusive property of DISH Network and we will have the right, in our sole discretion, to provide or replace leased Equipment with new or reconditioned Equipment and to remove, or require the return of, such Equipment upon cancellation or disconnection of your Services for any reason. None of such Equipment shall be deemed fixtures or part of your realty. Our ownership of such Equipment may be displayed by notice contained on it. You shall have no right to pledge, sell, mortgage, otherwise encumber, give away, remove, relocate, alter or tamper with such Equipment (or any notice of our ownership thereon) at any time. Any reinstallation, return of, or change in, the location of such Equipment shall be performed by us at our service rates in effect at the time of such service. You shall not attach any electrical or other devices to, or otherwise alter any, Equipment without our prior written consent. We reserve the right to make such filings as may be determined to be necessary by us in our sole discretion to evidence our ownership rights in such Equipment, and you agree to execute any and all documents as may be so determined to be necessary for us to make such filings. You are responsible for preventing the loss or destruction of leased Equipment and we recommend that such Equipment be covered by your homeowners, renters or other insurance policy.

B. Upon termination of your Services, you must notify our Customer Service Center or call the telephone number set forth in your promotion agreement to schedule the return of your leased Equipment. If such Equipment is not returned in working order, normal wear and tear excepted, certain charges will apply as described in your governing promotion agreement. You are responsible for, and agree to pay, any costs of repair, replacement or other costs if you do not return such Equipment in an undamaged condition.

C. You shall notify us promptly of any defect in, damage to, or accident involving your leased Equipment. All maintenance and repair of such Equipment shall be performed by us or our designee(s). DISH Network may charge you for any repairs that are necessitated by any damage to, or misuse of, such Equipment.

Page 76

Image 101
Contents Contents Contents Safety Instructions Safety Conventions Used in this Guide Welcome to Dish NetworkOverview Quick Start Guide If YOU Need More AssistanceOrdering Your Programming To Order ProgrammingFinding Programs to Watch Finding Programs To WatchAbout Satellite Television Solar Interference Satellite Signal QualityRain and Snow Fade Front Panel Back Panel Parts of the SystemParts of the System Remote ControlRemote Control Batteries Using the Remote Control in SAT Mode Remote ControlUsing the Remote Control in TV Mode Using the Remote Control in VCR Mode Changing the Remote Control Address Remote Control Modes Satellite Video RecoveryControl Other Devices with the Remote Control Other Devices with the RemoteSET UP the Remote Control Limited ModeScan for Device Codes Check the Device Codes Down Arrow button repeatedly until the device turns offPower Button Control a Tuner or Amplifier AUX Mode ButtonVolume Button Select ButtonUsing TV or Amplifier Volume Control To switch back to TV volume control, do the followingMenus MenusMain Menu Program GuideSystem Locks Menu Theme Categories MenuFavorites Lists Menu Browse Banner System Setup MenuTimers Menu Installing the Receiver in AN Existing System Installing the Receiver in an Existing System Chapter Changing Channels Using the MenusOpening the Menus Closing the MenusSelecting a Menu Option Highlighting a Menu OptionLists of Choices in the Menus Highlighting a Choice in a Menu ListCanceling a Procedure Using the MenusUsing the Program Guide Opening the Program Guide Using the Program GuideSelecting a Program in the Program Guide Closing the Program GuideUsing the Browse Banner Using the Program BannerUsing the Browse Banner Themes Using ThemesOrdering PAY PER View Programs Using Search Using SearchDish Home Interactive TV Applications Creating or Changing a Favorites List Using Favorites ListsUsing Favorites Lists Changing the Name of a Favorites List Making a Favorites List ActiveUsing Timers Using TimersEvent Timer Types Event Timer FrequenciesSetting UP AN Automatic Event Timer Before AN Event Timer OperatesSetting UP a Manual Event Timer Select the Create option to save the event timerQuick Record Overlapping Event TimersEditing AN Event Timer Maximum Number of Event TimersCreating VCR Event Timers Deleting AN Event TimerReviewing Event Timers Setting UP the Receiver and VCR to USE a VCR Event Timer LOCKS, BLACKED-OUT PROGRAMS, and Event TimersPower OFF and Event Timers HOW to SET Locks a TWO Step Process Using LocksCreating a Password Using LocksWhen YOU have Locked the Receiver Creating or Changing Rating Content Code Locks Locking the Receiver Creating or Changing Channel LocksLocking the Receiver Front Panel Control Buttons Unlocking the ReceiverLocking PAY PER View Programs Unlocking the Receiver Front Panel Control ButtonsOpening a Locked ITEM, or Opening the Locks Menu Changing the Receiver PasswordHiding Adult Channels Caller ID Screens Using Caller IDUsing Caller ID To Turn the Caller ID on and OFF Changing Menu Languages Changing Program LanguagesChanging Program Languages Resetting Your Receiver Resetting the Receiver to Factory Default SettingsUsing Troubleshooting Tools Point Dish and Check Switch Using Troubleshooting ToolsDiagnostics Chapter Reference Troubleshooting TablesON-SCREEN Messages ReferenceTroubleshooting Tables Dishpro Twin Lnbf 078, 079What Is Possible Reason What to Do Happening Using the Remote ControlWatching a Program Hearing a ProgramUsing Locks Using the MenusUsing the Program Guide or the Browse Banner Changing Channels Using Favorite ListsBuying a PAY PER View Program Troubleshooting TablesUsing the Telephone for Voice /DATA /FAX View event You try to set up an event Using Event TimersDevice Codes TV CodesVCR Codes DVD Player Codes Device CodesTuner Codes Amplifier TUNER/AMPLIFIER CodesChapter Chapter 015 Dishpro Twin Lnbf Using the Remote Control Hearing a Program Using the Menus Changing Channels Buying a PAY PER View Program Using Event Timers TV Codes MTC TV/VCR Combo Codes DVD Player Codes DVD/VCR Combo Chapter Index Index Index Index 143334 What the Warranty does not Cover Limited WarrantyWhat the Warranty Covers Advance Exchange Program Legal LimitationsIf YOU Need Assistance Post Receipt Exchange Program Accessory WarrantyResidential Customer Agreement Dish Network Service Billing Policies and Payments for Services Cancellation of Service Equipment Leased Equipment Transfer of ACCOUNT, Services or Equipment Telephone Communication FCC ComplianceCompliance Information Statement FCC ComplianceAppendix