Chapter 2
Parts of the System
LIMITED MODE
You can program your remote control in limited mode to keep from accidentally changing the channel on your TV or VCR. When you use the remote to control your TV in limited mode, you will only be able to use the POWER, MUTE, and VOLUME buttons. Also, when you use the remote to control your VCR in limited mode, you will only be able to use the POWER and VCR tape control buttons.
The section Set Up the Remote Control has a step that tells the remote control to go into limited mode.
Note: Limited mode is not used with amplifiers.
SET UP THE REMOTE CONTROL
You can set up the remote to control other devices using the device codes listed on page 65.
1.Turn the device on.
2.Find the brand name of the device in the tables starting on page 65.
3.Press and hold the mode button until all the other mode buttons light up, and then let go of the button.
The mode button flashes.
4.For AUX mode only. Press 0 for a second TV, or 1 for a VCR or DVD player, or 2 for a tuner, or amplifier.
5.Enter one of the
6.If you want to program limited mode, press 1. If not skip to step 7.
7.Press the POUND (#) button. If you are programming a TV/ VCR or TV/DVD combination, repeat step 3 with the remote control in VCR mode.
Use the device’s front panel buttons or its remote control.
If the brand isn’t listed, see Scan for Device Codes on page 13.
For example, hold the TV mode button for a TV until all of the other mode buttons light. When you let go, the TV mode light will flash.
This step is for programming which kind of device that should be programmed in AUX mode. If you’re not programming in AUX mode, skip to step 5.
The
See Limited Mode for more information.
If you entered the code correctly, the mode button flashes three times.
Page 12