Kathrein UFD 520 manual To add analogue programmes, Analogue programme list

Programme list - TV/radio

Only alphanumerical and decimal entries are accepted at the positions

￿￿name,

￿￿video PID (programme identification),

￿￿audio PID,

￿￿PCR PID (PCR = Programme Clock Reference) and

￿￿audio PID dig.

Incorrect PID entries are rejected with the displayed message.

Incorrect parameter

Press the ￿button 3 times to return to the TV screen. Confirmation is given that your changes have been saved and the information display of the programme cur- rently received appears for several seconds on the screen. The new programme is added to the end of the existing programme list.

You can obtain the necessary PIDs from relevant TV and satellite magazines, the internet as well as from SAT 1 teletext. Refer to section "Operating instructions" for information on how to make alphanumeric entries.

Never change the PIDs without good reason as they affect the identification of the reception signal.

To add analogue programmes

Analogue television programmes always occupy one transponder. Therefore, pro- ceed like newly setting an analogue transponder (see section "Analogue- transponder").

Analogue programme list

With the reception of analogue stations,

the programme list is requested with ￿ and is displayed in white. To indicate the

desired programme, use the ￿￿and

￿￿buttons to move the arrow on the left side of the list either page-by-page or line-by-line.

Press ￿to switch to the indicated

programme and the info bar is displayed white for a short time.

27