Kathrein UFD 520 manual TP set-up/search, Transponder selection

Page 40

Installation menu

The message appears at the end of the search.

The search is complete

Press (OK) button

All new programmes are added to the existing programme list.

You can interrupt the search by pressing

the ￿button.

TP set-up/search

In this menu you can scan through the transponders for specific programmes, e.g. when new programmes are offered in the package of a specific broadcaster. You can obtain this information from the respective teletext from SAT 1 or corresponding TV and satellite magazines

as well as from the Internet. Press ￿to open the menu.

Transponder selection

The following settings are now possible (select positions with ￿￿):

- Desired satellite with ￿or ￿, the trans- ponder frequency with numerical buttons,

- the polarisation with ￿or ￿button,

the symbol rate with the numerical buttons and

- search mode for free-to-air or free and

- encrypted programmes with the ￿or ￿ button.

The bar diagram indicates the relative signal strength and is not an indication for the quality of the receiving system.

Start the search by pressing ￿in the "search" position.

The shown on-screen display appears as the result of the search.

Exit this menu by pressing ￿and go to the previously highlighted programme (here ZDF).

Press the ￿to return again to this menu to continue searching for further trans- ponders.

40

Image 40
Contents Operating Manual Page Preface Important NotesContents Oscillator frequency L.O Changing the oscillator frequency Transponder selection Safety instructions Place of installation VentilationHumidity, exposure to sunlight, heat Mains voltageView of front panel Controls, displays and connectionsView of rear panel Remote control handset keys Command of the remote control Receiver on the command setOperating instructions Menu conceptButton functions Alphanumeric entriesLanguage selection OSD Presetting receiving system Connection and start-upTo connect receiver Sat if connectionInserting batteries in the remote control LNB-supply voltageTV and video recorder connection Audio connectionFactory setting of receiver First time installationFirst steps Radio channel indicator Error message TV programme listOn screen displays Important screen displaysRadio programme list Selecting a TV programme Programme selectionReception status digital Switching over to radio programme Reception status analogueReception status radio Selecting a radio programme by number entryTimer settings VPS-SignalSound settings Setting the volumeStereo and two-channel sound reproduction MuteSelecting TV/radio programmes last received Programme list TV/radioFavourite programmes Programme assortment To delete a programmeTo add a programme manually To add analogue programmes Analogue programme listSetting up a satellite Adding/removing satellitesTo enter a satellite name To remove a satelliteProgramme overview EPG timer programmingFull EPG Password Factory settingEntering a password Parental lockPassword Backup operation Setting system parameters System parametersSummer time TV typePicture format ScreenOSD trans LNB configuration Oscillator frequency L.OInstallation menu Changing the oscillator frequencyAntenna settings DiSEqC settingSatellite search TP set-up/search Transponder selectionDiSEqC UFO Set-up All new programmes are added to the existing programme listHigh/Low Pre-programming is not deleted with Reset Analogue setting Video menuHDP Mode Audio modeAudio menu DecoderBandwidth Frequency left/rightDe-emphasis Recording Video recorder connectionPlayback Analogue decoder connection Path must be set to external refer to section Video menuSoftware and programme lists update „Display infoData transfer from receiver to receiver PreparationTransferring programme lists Transferring operating softwareTechnical features Technical annexTechnical data Switchover VHS/S-VHS AccessoriesScart socket assignments Connection examples Connection arrangementBrückeund Glossary, abbreviations DVBShort technical lexicon AC3Short technical lexicon Satellite ServiceDiSEqC menu 998.6248/1001/ZWT Subject to technical modifications