Kathrein UFD 520 manual Analogue decoder connection

Page 48

Analogue decoder connection

	You can also connect a decoder to the UFD 520 receiver for analogue pay-TV pro-
	grammes. since it is capable of receiving analogue programmes.
Note	With decoders which require a video signal and supply a switching signal, no fur-
	ther setting is necessary.
	With decoders which do not supply a switching voltage, the receiver's video signal
	path must be set to external (refer to section: "Video menu."
	Also comply with the decoder specifications!
	Connect the decoder to the VCR/AUX Scart socket (5) using the Scart cable.

48

Image 48

Contents Operating Manual Page Preface Important NotesContents Oscillator frequency L.O Changing the oscillator frequency Transponder selection Safety instructions Place of installation VentilationHumidity, exposure to sunlight, heat Mains voltageControls, displays and connections View of front panelView of rear panel Remote control handset keys Command of the remote control Receiver on the command setOperating instructions Menu conceptButton functions Alphanumeric entriesLanguage selection OSD Presetting receiving system Connection and start-upTo connect receiver Sat if connectionInserting batteries in the remote control LNB-supply voltageTV and video recorder connection Audio connectionFirst time installation Factory setting of receiverFirst steps Radio channel indicator Error message TV programme listOn screen displays Important screen displaysRadio programme list Programme selection Selecting a TV programmeReception status digital Switching over to radio programme Reception status analogueReception status radio Selecting a radio programme by number entryTimer settings VPS-SignalSound settings Setting the volumeStereo and two-channel sound reproduction MuteProgramme list TV/radio Selecting TV/radio programmes last receivedFavourite programmes Programme assortment To delete a programmeTo add a programme manually To add analogue programmes Analogue programme listSetting up a satellite Adding/removing satellitesTo enter a satellite name To remove a satelliteEPG timer programming Programme overviewFull EPG Password Factory settingEntering a password Parental lockPassword Backup operation Setting system parameters System parametersSummer time TV typePicture format ScreenOSD trans LNB configuration Oscillator frequency L.OInstallation menu Changing the oscillator frequencyDiSEqC setting Antenna settingsSatellite search TP set-up/search Transponder selectionDiSEqC UFO Set-up All new programmes are added to the existing programme listHigh/Low Pre-programming is not deleted with Reset Analogue setting Video menuHDP Mode Audio modeAudio menu DecoderFrequency left/right BandwidthDe-emphasis Video recorder connection RecordingPlayback Analogue decoder connection Path must be set to external refer to section Video menuSoftware and programme lists update „Display infoData transfer from receiver to receiver PreparationTransferring programme lists Transferring operating softwareTechnical features Technical annexTechnical data Accessories Switchover VHS/S-VHSScart socket assignments Connection examples Connection arrangementBrückeund Glossary, abbreviations DVBShort technical lexicon AC3Short technical lexicon Service SatelliteDiSEqC menu 998.6248/1001/ZWT Subject to technical modifications