Kathrein UFD 520 manual Place of installation, Ventilation, Humidity, exposure to sunlight, heat

Page 8

Safety instructions

Important notes for siting and installation.

Place of installation

Every electronic device generates heat. The rise in temperature, however, lies within a safe range. Slight colour changes may occur to sensitive furniture surfaces and veneers over the course of time due to the constant effect of heat. In conjunc- tion with treated furniture surfaces, the unit’s rubber feet can likewise give rise to changes in colour. Where necessary, place the unit on a suitable pad.

Ventilation

The heat that is generated in this unit is dissipated quite adequately. Never install the receiver in a cabinet, shelf or rack with inadequate ventilation. Never close off the cooling slots on the unit.

Do not place objects on top of the unit. Maintain a clearance of at least 10 cm above the unit so that the heat generated within the unit is conducted away without obstruction.

Humidity, exposure to sunlight, heat

Protect the unit against humidity, drips and splashing.

Do not place the unit close to radiators nor expose it to direct sunlight.

Mains voltage

Operate the receiver only from a 230V / 50 Hz mains voltage.

The unit must not be connected to the mains and switched on until after the con- nections have been set up for the antenna and TV set.

Grounding

The parabolic antenna is to be grounded in accordance with regulations. The rele- vant local and/or German VDE regulations are to be complied with here.

8

Image 8
Contents Operating Manual Page Preface Important NotesContents Oscillator frequency L.O Changing the oscillator frequency Transponder selection Safety instructions Place of installation VentilationHumidity, exposure to sunlight, heat Mains voltageView of rear panel Controls, displays and connectionsView of front panel Remote control handset keys Command of the remote control Receiver on the command setOperating instructions Menu conceptButton functions Alphanumeric entriesLanguage selection OSD Presetting receiving system Connection and start-upTo connect receiver Sat if connectionInserting batteries in the remote control LNB-supply voltageTV and video recorder connection Audio connectionFirst steps First time installationFactory setting of receiver Radio channel indicator Error message TV programme listOn screen displays Important screen displaysRadio programme list Reception status digital Programme selectionSelecting a TV programme Switching over to radio programme Reception status analogueReception status radio Selecting a radio programme by number entryTimer settings VPS-SignalSound settings Setting the volumeStereo and two-channel sound reproduction MuteFavourite programmes Programme list TV/radioSelecting TV/radio programmes last received Programme assortment To delete a programmeTo add a programme manually To add analogue programmes Analogue programme listSetting up a satellite Adding/removing satellitesTo enter a satellite name To remove a satelliteFull EPG EPG timer programmingProgramme overview Password Factory settingEntering a password Parental lockPassword Backup operation Setting system parameters System parametersSummer time TV typePicture format ScreenOSD trans LNB configuration Oscillator frequency L.OInstallation menu Changing the oscillator frequencySatellite search DiSEqC settingAntenna settings TP set-up/search Transponder selectionDiSEqC UFO Set-up All new programmes are added to the existing programme listHigh/Low Pre-programming is not deleted with Reset Analogue setting Video menuHDP Mode Audio modeAudio menu DecoderDe-emphasis Frequency left/rightBandwidth Playback Video recorder connectionRecording Analogue decoder connection Path must be set to external refer to section Video menuSoftware and programme lists update „Display infoData transfer from receiver to receiver PreparationTransferring programme lists Transferring operating softwareTechnical features Technical annexTechnical data Scart socket assignments AccessoriesSwitchover VHS/S-VHS Connection examples Connection arrangementBrückeund Glossary, abbreviations DVBShort technical lexicon AC3Short technical lexicon DiSEqC menu ServiceSatellite 998.6248/1001/ZWT Subject to technical modifications