Kathrein UFD 520 manual Programme overview, Full EPG, EPG timer programming

hand column, the ￿￿

Programme overview

EPG

Full EPG

With the ￿button, you receive an overview of the programmes (see on-screen display) currently received from the transponder with time and duration, provided that they are broadcast with elec- tronic programme guide (EPG), for example, with ARD and ZDF. In the right-hand column, the programme title is given in abbreviated form, and the complete title appears in the last two lines. In the left-

keys can be used to move the cursor

to a programme which should be switched to with the ￿button. Use ￿to exit the on-screen display again.

The time scale can be altered with the ￿￿buttons, so the other course of programmes can be called up.

Use the Info button ￿to receive further information with up to 254 symbols about the currently running programme.

With the ￿ and ￿ buttons, you receive the programme over- view of the currently received transmitter with time and duration (see on-screen display), provided that they broadcast the electronic pro- gramme guide (EPG).

The length of the programme list depends on each programme pro- vider and can amount to several days.

It lasts a few seconds for the list to download.

EPG timer programming

Afterwards, you can move the coloured bar in the list with the

￿￿buttons and select a programme for timer programming.

The timer is selected with the ￿ button and confirmed with ￿. The programme is recorded at the set time.

By pressing the ￿three times, you can exit this position without a timer setting.￿

30