Kathrein UFD 520 Controls, displays and connections, View of front panel, View of rear panel

Controls, displays and connections

This section contains a brief description of all the control elements, displays and connections. The key symbols presented here are also used when describing op- erating sequences.

View of front panel

(Flap folded down)

DIGITAL ANALOG SATELLITE RECEIVER	MENU		SELECT
1	2	3	4 5 6	7	8	9

View of rear panel

TV	IFINPUTDIGITAL	IFINPUT	AC98V-249V~
	920-2150MHz
AUDIO VIDEO	14/18Vmax.400mA	ANALOG	50/60Hz
		920-2150MHz	max.30W
	22kHz

L DiSEqC1.1

	VCR	DATAI/O	UFD520 260498
	AUX	IFOUTPUT
R

Elektroschock-Gefahr!

Nichtöfnen

1 2 3 4 5 6 7 8 9 10

Front panel controls and displays

1On/Off switch (with mains separation)

2Menu button to call up or exit from menus or submenus

3Indicator to confirm remote control signal

4Select-button

to confirm a selection

5Power indicator

6Standby indicator

7Cursor keys to step through menus and programmes, and for adjustment of the vol- ume (corresponds to the remote control)

8LED display (4-charachter 7-segment dis- play) for display of programme position and time

9Pressure catch for front flap

Open by lightly applying pressure on the upper right-hand side

Rear panel controls and displays

1Audio output

2 Cinch sockets, left and right channel

2Dolby Digital-output (AC3)

3Video output (FBAS)

4Scart socket TV connection

5Scart socket VCR/AUX connection

6DATA socket

Interface for serial data transmission (Service)

7Satellite IF signal input

Output of the LNB supply voltage and con- trol signals (22-kHz and DiSEqC 1.1)

8Satellite IF signal output loop-through Sat IF signal

9Satellite IF input for analogue reception. External coax-bridge from 8 to 9 included in delivery.

10Mains voltage supply line

9