Kathrein UFD 520 manual Summer time, TV type, Picture format, Screen, Mode, OSD colour

Page 35

Password

Summer time

See above. Changeover in spring or fall.

Confirm by pressing two times.

TV type

Use the buttons to specify whether your TV set is a

PAL,

Multi-standard

NTSC unit

Confirm by pressing two times.

Picture format

Use the buttons to select the type of picture format, either

4 : 3 format or

16 :9 format.

Confirm by pressing two times.

Screen

Use thebuttons to select the type of screen display:

conventional (P/S) = standard representation for 4:3 units or

widescreen picture (letter box display off) - in this settings, the widescreen is required for the 16:9 unit.

Confirm by pressing two times.

A/V mode

Here, you use the buttons to select the type of video signal which is present on the Scart socket. Select the signal which your TV set is able to process.

Observe the operating instructions of your television set!

FBAS –composite baseband signal (colour-/picture-/blanking-/synchronising- signal)

RGB – red-/green-/blue-signal

Y/C – S-VHS signal (luminance/chrominance).

Confirm by pressing two times.

OSD colour

Use the buttons to select the background colour of the on-screen display.

Confirm by pressing two times.

35

Image 35

Contents Operating Manual Page Important Notes PrefaceContents Oscillator frequency L.O Changing the oscillator frequency Transponder selection Safety instructions Mains voltage Place of installationVentilation Humidity, exposure to sunlight, heatView of rear panel Controls, displays and connectionsView of front panel Remote control handset keys Receiver on the command set Command of the remote controlAlphanumeric entries Operating instructionsMenu concept Button functionsLanguage selection OSD Sat if connection Presetting receiving systemConnection and start-up To connect receiverAudio connection Inserting batteries in the remote controlLNB-supply voltage TV and video recorder connectionFirst steps First time installationFactory setting of receiver Important screen displays Radio channel indicatorError message TV programme list On screen displaysRadio programme list Reception status digital Programme selectionSelecting a TV programme Reception status analogue Switching over to radio programmeSelecting a radio programme by number entry Reception status radioVPS-Signal Timer settingsMute Sound settingsSetting the volume Stereo and two-channel sound reproductionFavourite programmes Programme list TV/radioSelecting TV/radio programmes last received To delete a programme Programme assortmentTo add a programme manually Analogue programme list To add analogue programmesAdding/removing satellites Setting up a satelliteTo remove a satellite To enter a satellite nameFull EPG EPG timer programmingProgramme overview Parental lock PasswordFactory setting Entering a password Password Backup operation System parameters Setting system parametersScreen Summer timeTV type Picture formatOSD trans Oscillator frequency L.O LNB configurationChanging the oscillator frequency Installation menuSatellite search DiSEqC settingAntenna settings Transponder selection TP set-up/searchAll new programmes are added to the existing programme list DiSEqC UFO Set-upHigh/Low Pre-programming is not deleted with Reset Video menu Analogue settingDecoder HDP ModeAudio mode Audio menuDe-emphasis Frequency left/rightBandwidth Playback Video recorder connectionRecording Path must be set to external refer to section Video menu Analogue decoder connection„Display info Software and programme lists updateTransferring operating software Data transfer from receiver to receiverPreparation Transferring programme listsTechnical annex Technical featuresTechnical data Scart socket assignments AccessoriesSwitchover VHS/S-VHS Connection arrangement Connection examplesBrückeund DVB Glossary, abbreviationsAC3 Short technical lexiconShort technical lexicon DiSEqC menu ServiceSatellite 998.6248/1001/ZWT Subject to technical modifications