Kathrein UFD 520 manual Password

Page 32

Password

Here, use the ￿￿buttons to select the "Programme list" entry.

Using the ￿￿buttons, you can now specify whether you want to edit the TV or ra-

dio list. Confirm your selection with ￿.

The desired programme is now displayed on the screen.

Use the ￿￿buttons to select the "Padlock" symbol, confirm the selection with ￿ and the line with the currently running programme is highlighted in the list with a

coluured bar.

Use the ￿￿and the ￿￿buttons to move the bar page-by-page or line-by- line.

Using the ￿button, the highlighted line can be marked with the "Padlock" symbol.

Press ￿two times to confirm the memory modifications, and after pressing

the ￿button once more, you are requested to enter the password, provided that none has been entered yet (please enter a four-digit number here).

Finally, the programme originally received appears and for a few seconds the on- screen info display is displayed.

By pressing the ￿button again in the same line, the symbol is removed.

Remember that some programmes can be received several times over on different satellites. In this case, each incidence needs to be locked.

The same accounts for transponder exchange.

32

Image 32
Contents Operating Manual Page Preface Important NotesContents Oscillator frequency L.O Changing the oscillator frequency Transponder selection Safety instructions Place of installation VentilationHumidity, exposure to sunlight, heat Mains voltageView of rear panel Controls, displays and connectionsView of front panel Remote control handset keys Command of the remote control Receiver on the command setOperating instructions Menu conceptButton functions Alphanumeric entriesLanguage selection OSD Presetting receiving system Connection and start-upTo connect receiver Sat if connectionInserting batteries in the remote control LNB-supply voltageTV and video recorder connection Audio connectionFirst steps First time installationFactory setting of receiver Radio channel indicator Error message TV programme listOn screen displays Important screen displaysRadio programme list Reception status digital Programme selectionSelecting a TV programme Switching over to radio programme Reception status analogueReception status radio Selecting a radio programme by number entryTimer settings VPS-SignalSound settings Setting the volumeStereo and two-channel sound reproduction MuteFavourite programmes Programme list TV/radioSelecting TV/radio programmes last received Programme assortment To delete a programmeTo add a programme manually To add analogue programmes Analogue programme listSetting up a satellite Adding/removing satellitesTo enter a satellite name To remove a satelliteFull EPG EPG timer programmingProgramme overview Password Factory settingEntering a password Parental lockPassword Backup operation Setting system parameters System parametersSummer time TV typePicture format ScreenOSD trans LNB configuration Oscillator frequency L.OInstallation menu Changing the oscillator frequencySatellite search DiSEqC settingAntenna settings TP set-up/search Transponder selectionDiSEqC UFO Set-up All new programmes are added to the existing programme listHigh/Low Pre-programming is not deleted with Reset Analogue setting Video menuHDP Mode Audio modeAudio menu DecoderDe-emphasis Frequency left/rightBandwidth Playback Video recorder connectionRecording Analogue decoder connection Path must be set to external refer to section Video menuSoftware and programme lists update „Display infoData transfer from receiver to receiver PreparationTransferring programme lists Transferring operating softwareTechnical features Technical annexTechnical data Scart socket assignments AccessoriesSwitchover VHS/S-VHS Connection examples Connection arrangementBrückeund Glossary, abbreviations DVBShort technical lexicon AC3Short technical lexicon DiSEqC menu ServiceSatellite 998.6248/1001/ZWT Subject to technical modifications