Kathrein UFD 520 manual Video recorder connection, Recording, Playback

Page 47

Video recorder connection

The connection diagram provided at the end of this User's Guide and the descrip- tion of the video recorder will show you how you should connect your video re- corder to the receiver.

Recording

In order to make a VCR recording, the satellite receiver must be switched on or the timer must be pre-programmed (see section "Timer settings“).

Playback

For VCR playback, the satellite receiver must be set to "standby" so that the signal route is switched through from the VCR/AUX SCART socket to the TV SCART socket.

You must set the SCART socket of the Sat receiver to "VCR" with the button for your TV set to automatically play back the picture of the video recorder.

In this setting, the picture of the video recorder is switched through to the TV set during playback.

If you set "SAT" by pressing the button, the Sat receiver will have priority.

In the setting "TV," the video signal of the television set has priority.

47

Image 47

Contents Operating Manual Page Important Notes PrefaceContents Oscillator frequency L.O Changing the oscillator frequency Transponder selection Safety instructions Mains voltage Place of installationVentilation Humidity, exposure to sunlight, heatView of rear panel Controls, displays and connectionsView of front panel Remote control handset keys Receiver on the command set Command of the remote controlAlphanumeric entries Operating instructionsMenu concept Button functionsLanguage selection OSD Sat if connection Presetting receiving systemConnection and start-up To connect receiverAudio connection Inserting batteries in the remote controlLNB-supply voltage TV and video recorder connectionFirst steps First time installationFactory setting of receiver Important screen displays Radio channel indicatorError message TV programme list On screen displaysRadio programme list Reception status digital Programme selectionSelecting a TV programme Reception status analogue Switching over to radio programmeSelecting a radio programme by number entry Reception status radioVPS-Signal Timer settingsMute Sound settingsSetting the volume Stereo and two-channel sound reproductionFavourite programmes Programme list TV/radioSelecting TV/radio programmes last received To delete a programme Programme assortmentTo add a programme manually Analogue programme list To add analogue programmesAdding/removing satellites Setting up a satelliteTo remove a satellite To enter a satellite nameFull EPG EPG timer programmingProgramme overview Parental lock PasswordFactory setting Entering a passwordPassword Backup operation System parameters Setting system parametersScreen Summer timeTV type Picture formatOSD trans Oscillator frequency L.O LNB configurationChanging the oscillator frequency Installation menuSatellite search DiSEqC settingAntenna settings Transponder selection TP set-up/searchAll new programmes are added to the existing programme list DiSEqC UFO Set-upHigh/Low Pre-programming is not deleted with Reset Video menu Analogue settingDecoder HDP ModeAudio mode Audio menuDe-emphasis Frequency left/rightBandwidth Playback Video recorder connectionRecording Path must be set to external refer to section Video menu Analogue decoder connection„Display info Software and programme lists updateTransferring operating software Data transfer from receiver to receiverPreparation Transferring programme listsTechnical annex Technical featuresTechnical data Scart socket assignments AccessoriesSwitchover VHS/S-VHS Connection arrangement Connection examplesBrückeund DVB Glossary, abbreviationsAC3 Short technical lexiconShort technical lexicon DiSEqC menu ServiceSatellite 998.6248/1001/ZWT Subject to technical modifications