Kathrein UFD 520 manual Connection examples, Connection arrangement

Page 54

Technical annex

Connection examples

Connection arrangement 1:

Connection of a DVB-S satellite receiver to a receiving system.

Sat-Steckdose

ESD30

Radio

UFD 520

 

Sat-ZF

 

 

 

 

 

 

 

TV

IFINPUTDIGITAL

IFINPUT

AC98V-249V~

 

 

920-2150MHz

AUDIO VIDEO

14/18Vmax.400mA

ANALOG

50/60Hz

 

 

22kHz

920-2150MHz

max.30W

 

 

 

 

L

DiSEqC1.1

 

VCR

DATAI/O

UFD520 260498

 

AUX

IFOUTPUT

 

 

 

 

R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cinch

Elektroschock-Gefahr! Scart Nichtöfnen

AC3-Ausgang

UHF/VHF

TV

Scart

VCR

 

UHF/VHF

HiFi

Connection of the DVB-S receiver to a TV set, a VCR and a hi-fi system for receiv- ing and recording digital satellite TV and radio channels. The digital sound output can be connected to a Dolby Digital system.

The connection requires two SCART cables and one Cinch cable. If your TV is equipped for stereo, the stereo sound can also be reproduced via the stereo speakers of your TV set.

The UHF/VHF input of the TV set is connected via the UHF/VHF output and input sockets of the video recorder to the UHF/VHF output of the Sat socket. This con- nection makes it possible to receive terrestrial regional TV channels with the an- tenna system correspondingly aligned.

By connecting the antenna input socket of the hi-fi system to the radio output of the Sat socket you can receive terrestrial radio stations.

54

Image 54
Contents Operating Manual Page Preface Important NotesContents Oscillator frequency L.O Changing the oscillator frequency Transponder selection Safety instructions Humidity, exposure to sunlight, heat Place of installationVentilation Mains voltageControls, displays and connections View of front panelView of rear panel Remote control handset keys Command of the remote control Receiver on the command setButton functions Operating instructionsMenu concept Alphanumeric entriesLanguage selection OSD To connect receiver Presetting receiving systemConnection and start-up Sat if connectionTV and video recorder connection Inserting batteries in the remote controlLNB-supply voltage Audio connectionFirst time installation Factory setting of receiverFirst steps On screen displays Radio channel indicatorError message TV programme list Important screen displaysRadio programme list Programme selection Selecting a TV programmeReception status digital Switching over to radio programme Reception status analogueReception status radio Selecting a radio programme by number entryTimer settings VPS-SignalStereo and two-channel sound reproduction Sound settingsSetting the volume MuteProgramme list TV/radio Selecting TV/radio programmes last receivedFavourite programmes Programme assortment To delete a programmeTo add a programme manually To add analogue programmes Analogue programme listSetting up a satellite Adding/removing satellitesTo enter a satellite name To remove a satelliteEPG timer programming Programme overviewFull EPG Entering a password PasswordFactory setting Parental lockPassword Backup operation Setting system parameters System parametersPicture format Summer timeTV type ScreenOSD trans LNB configuration Oscillator frequency L.OInstallation menu Changing the oscillator frequencyDiSEqC setting Antenna settingsSatellite search TP set-up/search Transponder selectionDiSEqC UFO Set-up All new programmes are added to the existing programme listHigh/Low Pre-programming is not deleted with Reset Analogue setting Video menuAudio menu HDP ModeAudio mode DecoderFrequency left/right BandwidthDe-emphasis Video recorder connection RecordingPlayback Analogue decoder connection Path must be set to external refer to section Video menuSoftware and programme lists update „Display infoTransferring programme lists Data transfer from receiver to receiverPreparation Transferring operating software Technical features Technical annexTechnical data Accessories Switchover VHS/S-VHSScart socket assignments Connection examples Connection arrangementBrückeund Glossary, abbreviations DVBShort technical lexicon AC3Short technical lexicon Service SatelliteDiSEqC menu 998.6248/1001/ZWT Subject to technical modifications