Safety Instructions

DTB-D700F

This DTT has been manufactured to satisfy international safety standards. Please read the following recommended safety precautions carefully.

MAINS SUPPLY: AC 100 - 240V~, 50/60Hz

OVERLOADING: Do not overload wall outlets, extension cords or adapters as this can result in fire or electrical shock.

LIQUIDS:Keep liquids away from the DTB-D700F.

CLEANING: Before cleaning, disconnect the DTB-D700F from the wall socket. Use a cloth lightly dampened with water(no solvents) to

clean the exterior.

VENTILATION: Do not block the DTB-D700F ventilation holes. Ensure that free airflow is maintained around the DTB-D700F. Never store the DTB-D700F where it is exposed to direct sunlight or near heating equipment

e.g. a radiator.

Never stack other electronic equipment on top of the DTB-D700F. Place the DTB-D700F at least 30mm from the wall.

ATTACHMENTS: Do not use any attachment that is not recommended by the manufacturer; it may cause a hazard or damage the equipment.

CONNECTION TO THE CABLE TV SIGNAL AND TV:

Connect all components before plugging any power cords into the wall outlet. Always turn off the DTB-D700F, TV and other components before you connect or disconnect any cables.

SERVICING:Do not attempt to service this product yourself. Any attempt to do so will make the warranty invalid. Refer all servicing to a qualified service agent.

LIGHTNING: If the DTB-D700F is installed in an area subject to intense lightning activity, protection devices for the DTB-D700F mains connector and modem telephone line are essential.

The individual manufacturer’s instruction for safeguarding other equipment, such as TV set, Hi-Fi, etc., connected to the DTB-D700F must also be followed during lightning storms.

GROUNDING: CATV cable MUST BE EARTHED.

The grounding system must comply with SABS 061.

Note : Dispose the used batteries at designated place for environment protection

SAFETY INSTRUCTIONS

WARNING!

1.Follow these directions in order not to damage the power cord or plug.

●Do not modify or process the power cord or plug arbitrarily.

●Do not bend or twist the power cord too much.

●Make sure to disconnect the power cord with holding the plug.

●Separate heat appliances from the power cord as distance as possible in order to prevent the cover from being melted.

2.Failure to follow one of them may cause electrical shock.

●Do not open the main body.

●Do not insert metals or inflammable objects inside the product.

●Do not touch the power plug with a wet hand.

●Disconnect the power cord in case of lightening.

●Do not cover the receiver’s ventilation openings with items such as newspapers, clothes etc.

●Do not place the receiver on top of household appliances that emit heat.

3.Do not use the product when it is out of order. If you continue to use the product with a defect, it can cause a serious damage to the product. Make sure to contact your local product distributor when the product is out of order.

DTB-D700F

GB-2

D T T

R E C E I V E R

D V D

P L A Y E R

GB-3