OPERATING THE RECEIVER
3. BASIC FUNCTIONS (DVD)
2.4.5 System Information
If you have to contact your service provider or a service center they might ask for information available from this menu.
Place the cursor on this sub menu and press the OK key. The following will be the
2.4.6 Software Upgrade
You can download and upgrade the system software of the receiver through a specific channel through a specific channel designated by the broadcaster.
The distributor will provide you with more information about that. If you select to download a new software version, all your previous settings, access code and favourite channels etc. will be erased! Downloading may take a while during downloading don’t turn off the receiver.
2.4.7 Copy Channel Data
If you want to copy the channel data from one receiver to another, please follow the instruction below.
Please make your own channel data, such as favorite & lock channel with your own master box.
Then take your master box when you install another box.
1.Plug on both master & slave receivers
2.Master Box(Installed Box) :
3.Slave Box(Installing Box) : Menu Mode
4.Connect 2 Boxes with RS232 serial cable (Both end should have male connector)
5.Select the ‘System Setup’ and press the OK key.
6.Select the ‘Copy Channel Data’ with the / keys.
7.Press ‘OK’ to start channel data copy
3.1 Playing a Disc
Ensure that your
The first time you press the DTT/DVD key to switch the DVD mode.
●Play
-Press the OPEN/CLOSE ( 
) key.
The STANDBY indicator light goes out and the tray opens. Place a disc gently into the tray with the disc’s label facing up.
-Press the PLAY/PAUSE ( √/» ) key or OPEN/CLOSE ( 
) key to close the disc tray.
●Stopping Play
-Press the STOP ( ■ ) key during playback.
●Removing Disc
-Press the OPEN/CLOSE key.
●Pausing Play
-Press the PLAY/PAUSE ( √/» ) key on the remote during playback. Screen stops, no sound.
-To resume again, press the PLAY/PAUSE ( √/» ) key once again.
●Step Motion Play (Except CD)
-Press the SKIP ( ❙œœ / √√❙) key on the remote during PAUSE mode. Each time the key is pressed, a new frame will appear.
No sound is heard during STEP mode.
-Press the PLAY/PAUSE ( √/» ) key to resume normal play. (You can only perform step motion play in the forward direction.)
●Slow Motion Play (Except CD)
-Press the SEARCH ( œœ / √√ ) key on the remote during PAUSE mode.
-By pressing the SEARCH ( œœ / √√ ) key, you can select slow motion play for 1/8, 1/4 or 1/2 of normal speed.
No sound is heard during slow mode.
-Press the PLAY/PAUSE ( √/» ) key twice to resume normal play.
●RESUME function
When you stop disc play, the player remembers where you stopped, so when you press the PLAY/PAUSE ( √/» ) key again, it will pick up where you left off. (unless the disc is removed, the STOP ( ■ ) key is pressed twice or the player is unplugged.)
Note :
-If the player is left for screen saver time in pause mode, it will stop.
-If the player is left in the stop mode for more than 5 minutes, the power will automatically shut off. (Automatic
-If the player is left in the stop mode for more than two minute without any user interaction, a screen saver will be activated. Press the PLAY/PAUSE ( √/» ) key to resume normal play.
-This icon 
indicates an invalid key press.
D T T | R E C E I V E R | / | D V D | P L A Y E R |
GB